New Filter Elements Are Available For "Fire Resistant Fluid" Hydraulic Systems{5068}
Usage:
All Machines Equipped With "
Fire Resistant Fluid"
Hydraulic Systems
Description of Change: New filter elements are available for machines equipped with "Fire Resistant Fluid" Hydraulic Systems. These new elements use a different filter media than the former elements and will give longer service life.
Adaptable As: The new filter elements are direct replacements for the former elements as shown in the chart. The new elements can also be used in standard hydraulic systems as shown in the chart.
Caterpillar Information System:
1980/04/21 Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/14 6V2040 Ratchet Adapter Available For Use With Torque Multipliers On Hydraulic Cylinder Repair Stands{0614,0622}
1980/04/14 Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures{1378,1306}
1980/04/14 Dowtherm 209 Full-Fill Coolant{1350}
1980/04/14 Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems{1401,1453,1080}
1980/04/14 Repair Parts Now Available For 5S2801 Hose Press Group{0624}
1980/03/31 New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines{1217}
1980/03/31 Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31 Use Correct Cord Assembly With Jacket Water Heaters{1383}
1980/03/31 Caution: Outboard Bearing Must Be Removed From Extended Shaft Of Front Power Takeoff Before The Engine Is Moved{3055}
1980/03/31 Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31 Replacement Pinion And Output Gear Available For Service Of Torque Multiplier{0614}
1980/04/21 Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/28 New 1N3270 Auxiliary Drive Group Available As Attachment{1165}
1980/04/28 Boring Machine, Adapter Groups And Sleeves Available For Repair Of Damaged Cylinder Blocks{0622,1201,1216}
1980/04/28 Use 6V3044 Polishing Belt For Crankshaft Reconditioning{0622,1202}
1980/05/05 New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group{0663}
1980/05/05 Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions{0653,0374,1250}
1980/05/05 Improvements Made To Water Separator Groups{1263}
1980/05/05 Hardened Washers Now Used On Bolts For Fan Shroud{1353,1360}
1980/05/12 Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12 Improvements To Engine Oil Lines Group Makes Installation Easier; Prevents Reverse Connections{1307,1318,1155}
1980/05/12 "I checked everything but..."{0100}
1980/05/12 Boss Can Be Removed From Spacer Plate Cylinder Block To Get Clearance For Oil Filler Tube{1201,1316}