Repair Parts Now Available For 5S2801 Hose Press Group{0624}
Usage:
Four new parts, the 5P6072 Elbow, 3D8087 Nut, 3D8088 Sleeve and 6V2083 Tube are available for repairs of the 5S2801 Hose Press Group.
The 5S2801 Hose Press Group is part of the 7S1100 Hose Press Arrangement. This press operates at a maximum pressure of 10,000 psi (69000 kPa). Because of these pressures, only approved parts can be used for repairs.
The 6V2083 Tube, 5P6072 Elbow, 3D8087 Nut and 3D8088 Sleeve are used to connect the two cylinders in the 5P2801 Hose Press Group as shown in the illustration.
Location of 6V2083 Tube, 5P6072 Elbow, 3D8087 Nut and 3D8088 Sleeve.
Caterpillar Information System:
1980/03/31 New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines{1217}
1980/03/31 Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31 Use Correct Cord Assembly With Jacket Water Heaters{1383}
1980/03/31 Caution: Outboard Bearing Must Be Removed From Extended Shaft Of Front Power Takeoff Before The Engine Is Moved{3055}
1980/03/31 Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31 Replacement Pinion And Output Gear Available For Service Of Torque Multiplier{0614}
1980/03/31 6V2023 Flow Check Adapter Group Is Available{0651,0654}
1980/03/31 Use The 6V200 Hydraulic Wrench To Get Correct Torque Applications On Fasteners In Difficult Access Areas{0612,0623}
1980/03/24 Different Vibration Damper Now Used{1205}
1980/03/24 New Control Valve Body{1155,1159}
1980/03/24 New Plugs And Rubber Stoppers For Machines With Sealed And Lubricated Track{4169,4170,4175,0622}
1980/03/24 An Increase In Engine RPM Will Extend Vanes In Hydraulic Oil Pump To Start Pump Output{5055,5068}
1980/04/14 Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems{1401,1453,1080}
1980/04/14 Dowtherm 209 Full-Fill Coolant{1350}
1980/04/14 Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures{1378,1306}
1980/04/14 6V2040 Ratchet Adapter Available For Use With Torque Multipliers On Hydraulic Cylinder Repair Stands{0614,0622}
1980/04/21 Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21 New Filter Elements Are Available For "Fire Resistant Fluid" Hydraulic Systems{5068}
1980/04/21 Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/28 New 1N3270 Auxiliary Drive Group Available As Attachment{1165}
1980/04/28 Boring Machine, Adapter Groups And Sleeves Available For Repair Of Damaged Cylinder Blocks{0622,1201,1216}
1980/04/28 Use 6V3044 Polishing Belt For Crankshaft Reconditioning{0622,1202}
1980/05/05 New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group{0663}
1980/05/05 Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions{0653,0374,1250}