New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines{1217}
Usage:
A new liner seat insert is available for the No. 1 and No. 4 cylinders for D353 Engines. The new 6V2111 Liner Seat Insert is the same as the existing 5P8607 Liner Seat Insert, except it has only one notch instead of two for the water ferrule holes. On the No. 1 and No. 4 cylinders of these blocks, the second notch is not necessary, and is a possible source of water leakage. Use of the new 6V2111 Liner Seat Insert for these two cylinders will prevent this possible leakage. The 5P8607 Liner Seat Insert is still available, and is to be used for the other cylinders. The installation procedure is the same for both liner seat inserts.
Caterpillar Information System:
1980/03/31 Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/03/31 Use Correct Cord Assembly With Jacket Water Heaters{1383}
1980/03/31 Caution: Outboard Bearing Must Be Removed From Extended Shaft Of Front Power Takeoff Before The Engine Is Moved{3055}
1980/03/31 Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31 Replacement Pinion And Output Gear Available For Service Of Torque Multiplier{0614}
1980/03/31 6V2023 Flow Check Adapter Group Is Available{0651,0654}
1980/03/31 Use The 6V200 Hydraulic Wrench To Get Correct Torque Applications On Fasteners In Difficult Access Areas{0612,0623}
1980/03/24 Different Vibration Damper Now Used{1205}
1980/03/24 New Control Valve Body{1155,1159}
1980/03/24 New Plugs And Rubber Stoppers For Machines With Sealed And Lubricated Track{4169,4170,4175,0622}
1980/03/24 An Increase In Engine RPM Will Extend Vanes In Hydraulic Oil Pump To Start Pump Output{5055,5068}
1980/03/24 New Fuel Injection Lines And Clamps Prevent Stresses And Contact Which Can Cause Leakage{1252}
1980/04/14 Repair Parts Now Available For 5S2801 Hose Press Group{0624}
1980/04/14 Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems{1401,1453,1080}
1980/04/14 Dowtherm 209 Full-Fill Coolant{1350}
1980/04/14 Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures{1378,1306}
1980/04/14 6V2040 Ratchet Adapter Available For Use With Torque Multipliers On Hydraulic Cylinder Repair Stands{0614,0622}
1980/04/21 Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/21 New Filter Elements Are Available For "Fire Resistant Fluid" Hydraulic Systems{5068}
1980/04/21 Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/28 New 1N3270 Auxiliary Drive Group Available As Attachment{1165}
1980/04/28 Boring Machine, Adapter Groups And Sleeves Available For Repair Of Damaged Cylinder Blocks{0622,1201,1216}
1980/04/28 Use 6V3044 Polishing Belt For Crankshaft Reconditioning{0622,1202}
1980/05/05 New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group{0663}