1990/01/08 Caterpillar


Seals Available To Service Impact Ripper Valve Assembly{5351,6317}

Usage:


D9L, D10N, D11N Tractors Equipped With Impact Rippers

They are 4J0519 (1), 4J0522 (2), 4J8997 (3), 5P3108 (4) and 6V8397 (5) Seals. The seals are the only serviceable components.


Location of seals.

Caterpillar Information System:

1990/01/08 Incorrect Wiring Of Start Switch To Starter Relay{1453,1408,1426}
OPERATING ENVIRONMENT-AND ITS EFFECT ON SR4 GENERATORS Operating Environment - And Its Effect On SR4 Generators
MITSUBISHI DIESEL ENGINE S4Q2-T Others
MITSUBISHI DIESEL ENGINE S4Q2-T Troubleshooting
MITSUBISHI DIESEL ENGINE S4Q2-T Inspection, Adjustment, Break-in Operation and Performance Tests
MITSUBISHI DIESEL ENGINE S4Q2-T Electrical System
MITSUBISHI DIESEL ENGINE S4Q2-T Inlet And Exhaust Systems
MITSUBISHI DIESEL ENGINE S4Q2-T Cooling System
MITSUBISHI DIESEL ENGINE S4Q2-T Lubrication System
MITSUBISHI DIESEL ENGINE S4Q2-T Fuel System
MITSUBISHI DIESEL ENGINE S4Q2-T Engine Main Parts
MITSUBISHI DIESEL ENGINE S4Q2-T Overhaul Instructions
1990/01/08 Be Sure To Use Correct Ripper Lift And Tilt Cylinders On Tractors With Increased Hydraulic Pressures{5352,5356}
1990/01/08 Bearings Available For Repair Of Bulldozer Push Arm Connectors{6060,6061}
1990/01/08 Drag Brake And New Hand Control Used To Reduce Freespool Chattering In Winch{5163,5159}
1990/01/08 Erratic Transmission Shifting On Machines Equipped With Individual Clutch Modulation (ICM) Transmission Controls{3167}
1990/01/08 New Tilt Cylinder Head Permits Bucket To Correctly Dump At Any Height{5104}
1980/01/07 Three New Pressure Gauges Are Now Available {0651}
1980/01/07 Do Not Use 5B1161 Wire To Check Main Bearing And Connecting Rod Bearing Clearances; Use Plastigage {0653,1203,1219,1230}
1980/01/07 Fuel Heaters Are Now Available For Field Installation {1296}
1980/01/07 Different Steering Cylinder Hose Prevents Failures {4304}
1980/01/07 Important: XT3 And XT5 Hose Assemblies Must Be Fabricated And Installed Correctly For Maximum Service Life {5057}
1980/01/07 Improved Pivot Pin Assemblies Now Used Between End Of Steering Cylinder And Gooseneck {4303,6209,7107}
1980/01/07 New 6V114 Gauge Assembly Available To Measure Brake Drum Wear {0653,4252}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.