Usage:
NOTE: Check the condition of all O-ring seals and of all parts. If any components are worn or damaged, use new parts for replacement.
1. Put pilot control valve (7) in position, as shown.
2. Install four bolts (8) and the washers that hold pilot control valve (7) to the cab.
3. Connect electrical connector (6).
4. Connect six hose assemblies (4) to pilot control valve (5).
5. Put arm rest (1) and cover (3) in position, as shown. Install seven bolts (2) and the washers that hold the arm rest and the cover to the cab.
6. Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual for the machine that is being serviced.
End By:
a. Remove the steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced