Usage:
NOTE: Check the condition of all O-ring seals and of all parts. If any components are worn or damaged, use new parts for replacement.
1. Put bracket (3) in position on the secondary steering diverter valve. Install the three bolts, the nuts and the washers that hold bracket (3) to diverter valve (2).
2. Attach a hoist and a suitable lifting sling to secondary steering diverter valve (2). Put the secondary steering diverter valve in position on the transmission, as shown. Install two bolts (1) and the washers that hold the secondary steering diverter valve to the transmission. The weight of the secondary steering diverter valve is 44 kg (97 lb).
3. Connect the six hose assemblies to secondary steering diverter valve (2).
4. Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual for the machine that is being serviced.
End By:
a. Remove the steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.