R1700G LH.D. MACHINE SYSTEMS Caterpillar


Hydraulic Tank - Install

Usage:

Installation Procedure

NOTE: Check the condition of all O-ring seals and of all parts. If any components are worn or damaged, use new parts for replacement.

1. Install Tooling (A) on hydraulic tank (15), as shown. Attach a hoist and suitable lifting chains to Tooling (A). Put the hydraulic tank in position in the rear frame. The weight of the hydraulic tank is 162 kg (357 lb).

2. Install four bolts (14) and the washers that hold the hydraulic tank to the lower mounting bracket.

3. Put tube assembly (12) in position on the hydraulic tank. Install four bolts (13) and the washers that hold the tube assembly to the hydraulic tank. Install the bolt and the washer that hold clamp (11) to the hydraulic tank.

4. Install temperature sensor (10) in the hydraulic tank. Connect the temperature sensor cable at electrical connector (9).

5. Connect hose assemblies (6), (7) and (8) to the hydraulic tank.

6. Put manifold assembly (5) in position on the hydraulic tank. Install four bolts (4) and the washers that hold manifold assembly (5) to the hydraulic tank.

7. Put upper mounting bracket (1) in position on the rear frame. Install two bolts (2) and the washers that hold upper mounting bracket (1) to the rear frame.

8. Install four bolts (3) and the washers that hold upper mounting bracket (1) to the hydraulic tank.

End By:

a. Fill the hydraulic tank with oil to the correct level. Refer to Operation and Maintenance Manual for the machine that is being serviced.

b. Remove the steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.

Caterpillar Information System:

R1700G LH.D. MACHINE SYSTEMS Hydraulic Tank - Assemble
R1700G LH.D. MACHINE SYSTEMS Hydraulic Tank - Disassemble
R1700G LH.D. MACHINE SYSTEMS Hydraulic Tank - Remove
R1700G LH.D. MACHINE SYSTEMS Hydraulic Oil Cooler - Remove and Install
R1700G LH.D. MACHINE SYSTEMS Hydraulic System Pressure - Release
R1700G LH.D. MACHINE SYSTEMS Bucket Control Group Safety Pins - Remove and Install
R1700G LH.D. MACHINE SYSTEMS Steering Frame Lock Pin - Remove and Install
R1700G 8XZ1-334 Electrical System Schematic R1700G 8XZ1-334 Electrical System Schematic
R1700G 8XZ1-334 Electrical System Schematic Supplement R1700G 8XZ1-334 Electrical System Schematic Supplement
AUTODIG SYSTEM Testing and Adjusting
AUTODIG SYSTEM Systems Operation
R1700G Load Haul Dump Hydraulic, Braking and Steering System Schematic (STIC Steering) R1700G Load Haul Dump Hydraulic, Braking and Steering System Schematic (STIC Steering)
R1700G LH.D. MACHINE SYSTEMS Gear Pump (Steering, Brake and Pilot) - Remove
R1700G LH.D. MACHINE SYSTEMS Gear Pump (Steering, Brake and Pilot) - Disassemble
R1700G LH.D. MACHINE SYSTEMS Gear Pump (Steering, Brake and Pilot) - Assemble
R1700G LH.D. MACHINE SYSTEMS Gear Pump (Steering, Brake and Pilot) - Install
R1700G LH.D. MACHINE SYSTEMS Gear Pump (Secondary Steering) - Remove
R1700G LH.D. MACHINE SYSTEMS Gear Pump (Secondary Steering) - Disassemble
R1700G LH.D. MACHINE SYSTEMS Gear Pump (Secondary Steering) - Assemble
R1700G LH.D. MACHINE SYSTEMS Gear Pump (Secondary Steering) - Install
R1700G LH.D. MACHINE SYSTEMS Pressure Reducing Valve (Pilot Hydraulic System) - Remove and Install
R1700G LH.D. MACHINE SYSTEMS Steering Secondary Lockout Valve (STIC Steer) - Remove and Install
R1700G LH.D. MACHINE SYSTEMS Steering Pilot Control Valve (STIC Steer) - Remove
R1700G LH.D. MACHINE SYSTEMS Steering Pilot Control Valve (STIC Steer) - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.