Bridge Dowels
Usage:
Remove Bridge Dowels
Start By:
a. remove valves
1. Remove dowels (1) with tooling (A).
NOTE: See Special Instruction, Form No. SMHS7072, to make repairs of loose bridge dowels.
Install Bridge Dowels
1. Install dowels with tool (A). Dowels must be extended 53.34 ± 0.51 mm (2.10 ± .02 in) above the head surface.
End By:
a. install valves
Caterpillar Information System:
3412C GENERATOR SET ENGINE Valve Guides
3412C GENERATOR SET ENGINE Valves
3412C GENERATOR SET ENGINE Cylinder Head
3412C GENERATOR SET ENGINE Alternator
3412C GENERATOR SET ENGINE Valve Lifters & Push Rods
3412C GENERATOR SET ENGINE Rocker Shaft Assembly
3412C GENERATOR SET ENGINE Valve Covers
3412C GENERATOR SET ENGINE Exhaust Manifold
3412C GENERATOR SET ENGINE Turbocharger (Engines With One Turbocharger)
3412C GENERATOR SET ENGINE Turbocharger (Engines With Two Turbochargers)
3412C GENERATOR SET ENGINE Turbocharger (Left Side & Rear) STA
3412C GENERATOR SET ENGINE Aftercooler Core
3412C GENERATOR SET ENGINE Valve Seat Inserts
3412C GENERATOR SET ENGINE Spacer Plates
3412C GENERATOR SET ENGINE Radiator
3412C GENERATOR SET ENGINE Fan
3412C GENERATOR SET ENGINE Belts
3412C GENERATOR SET ENGINE Vibration Damper & Pulley
3412C GENERATOR SET ENGINE Crankshaft Front Seal & Wear Sleeve
3412C GENERATOR SET ENGINE Engine Front Support
3412C GENERATOR SET ENGINE Timing Gear Cover
3412C GENERATOR SET ENGINE Camshaft
3412C GENERATOR SET ENGINE Camshaft Bearings
3412C GENERATOR SET ENGINE Timing Gears