3412C GENERATOR SET ENGINE Caterpillar


Alternator

Usage:

Remove & Install Alternator

1. Remove guard bolts (1) and alternator guard (2).

2. Loosen adjustment nut (3) and bolt (8). Push alternator (7) toward the engine. Remove alternator belt (6) from the alternator pulley.

3. Disconnect and mark wire connections (5). Remove bolt (8) and bolt (4). Remove alternator (7).

The following steps are for the installation of the alternator.

4. Place alternator (7) in position, and then install bolt (4) and bolt (8) finger tight.

5. Push alternator (7) toward engine and replace alternator belt (6). Tighten bolt (4) and adjustment nut (3) for the proper alternator belt tension. See "Belt Tension Chart" in Testing and Adjusting.

6. Tighten mounting bolt (8).

7. Reconnect wires (5), and replace alternator guard assembly (2).

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.