Air Cleaner
Usage:
Remove & Install Air Filter Element & Air Cleaner Assembly
1. Disconnect and open clamps (1). Remove air cleaner cover (2).
2. Remove four screws (3) and air cleaner element (4).
3. Attach a suitable lifting device (5). Loosen two clamps (7) and remove intake hose (8). Remove mounting bolts (9) and remove air cleaner assembly (6).
4. For installation procedure, reverse steps 1 thru 3. In Step 2, replace air cleaner element (4), if necessary.
Caterpillar Information System:
3126B and 3126E On-highway Engines Electrical System 3126B and 3126E On-highway Engines Electrical System
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON Chapter 6 Repair and Replacement
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON Chapter 5 Troubleshooting
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON Chapter 4 Description of Operation
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON Chapter 3 Calibration and Operation
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON Chapter 2 Installation
FLO-TECH SPEED CONTROL ELECTRONIC SPEED CON Chapter 1 General Information
UG ACTUATOR Specifications
UG ACTUATOR UG Actuator Operation
UG ACTUATOR Operation & Maintenance
UG ACTUATOR Installation
UG ACTUATOR General Information
3412C GENERATOR SET ENGINE Aftercooler Core
3412C GENERATOR SET ENGINE Turbocharger (Left Side & Rear) STA
3412C GENERATOR SET ENGINE Turbocharger (Engines With Two Turbochargers)
3412C GENERATOR SET ENGINE Turbocharger (Engines With One Turbocharger)
3412C GENERATOR SET ENGINE Exhaust Manifold
3412C GENERATOR SET ENGINE Valve Covers
3412C GENERATOR SET ENGINE Rocker Shaft Assembly
3412C GENERATOR SET ENGINE Valve Lifters & Push Rods
3412C GENERATOR SET ENGINE Alternator
3412C GENERATOR SET ENGINE Cylinder Head
3412C GENERATOR SET ENGINE Valves
3412C GENERATOR SET ENGINE Valve Guides