Service Meter
Usage:
Remove & Install Service Meter
Typical Example
1. Remove two bolts and clamps (1). Remove service meter (2).
2. Remove coupling (4) and O-ring seal (3) from service meter (2).
NOTE: The following steps are for the installation of the service meter.
NOTE: Apply clean oil to O-ring seal (3) and coupling (4) before assembly.
3. Put O-ring seal (3) and coupling (4) in position on service meter (2).
4. Put service meter (2) in position and install two bolts and clamps (1).
Caterpillar Information System:
3406C GENERATOR SET ENGINE Engine Design
3406C GENERATOR SET ENGINE Introduction
3406C GENERATOR SET ENGINE Testing & Adjusting
3406C GENERATOR SET ENGINE Systems Operation
3406C GENERATOR SET ENGINE Electric Starting Motor
3406C GENERATOR SET ENGINE Alternator And Regulator
3406C GENERATOR SET ENGINE Service Meters
3406C GENERATOR SET ENGINE Flywheel
3406C GENERATOR SET ENGINE Flywheel Housing
3406C GENERATOR SET ENGINE Flywheel Housing Cover
3406C GENERATOR SET ENGINE Crankshaft
3406C GENERATOR SET ENGINE Connecting Rod And Main Bearing Journals
3406C GENERATOR SET ENGINE Radiator
3406C GENERATOR SET ENGINE Radiator & Radiator Guard
3406C GENERATOR SET ENGINE Fuel Injection Lines
3406C GENERATOR SET ENGINE Fuel Filter & Base
3406C GENERATOR SET ENGINE Fuel Transfer Pump
3406C GENERATOR SET ENGINE Governor & Fuel Pump Drive
3406C GENERATOR SET ENGINE Fuel Injection Pump Housing & Governor
3406C GENERATOR SET ENGINE Governor
3406C GENERATOR SET ENGINE Fuel Injection Pumps
3406C GENERATOR SET ENGINE Fuel Injection Pump Housing
3406C GENERATOR SET ENGINE Valve Covers
3406C GENERATOR SET ENGINE Fuel Injection Line Adapters