Oil Filler Cap
Usage:
Remove & Install Oil Filler Cap
1. Remove two bolts and washers (1).
2. Remove oil filler cap (2) and the gasket.
NOTE: For installation of the oil filler cap, reverse the removal steps.
Caterpillar Information System:
3306B GENERATOR SET ENGINE Crankcase Breather
3306B GENERATOR SET ENGINE Control Panel
3306B GENERATOR SET ENGINE Fuel Pressure Gauge
3306B GENERATOR SET ENGINE Precleaner
3306B GENERATOR SET ENGINE Air Filter Elements
3306B GENERATOR SET ENGINE Introduction
3306B GENERATOR SET ENGINE Testing & Adjusting
3306B GENERATOR SET ENGINE Systems Operation
3306B GENERATOR SET ENGINE Heat Exchanger Group (If Equipped)
3306B GENERATOR SET ENGINE Indicators
3306B GENERATOR SET ENGINE Ether Start Valve Assembly
3306B GENERATOR SET ENGINE Ether Atomizer Assembly
3306B GENERATOR SET ENGINE Radiator
3306B GENERATOR SET ENGINE Oil Level Gauge
3306B GENERATOR SET ENGINE Aftercooler
3306B GENERATOR SET ENGINE V-Belts
3306B GENERATOR SET ENGINE Alternator
3306B GENERATOR SET ENGINE Fan
3306B GENERATOR SET ENGINE Fan Adapter
3306B GENERATOR SET ENGINE Fan Drive
3306B GENERATOR SET ENGINE Engine Lift Brackets
3306B GENERATOR SET ENGINE Electric Starting Motor
3306B GENERATOR SET ENGINE Fuel Injection Lines
3306B GENERATOR SET ENGINE Fuel Injection Nozzles