Ether Atomizer Assembly
Usage:
(1) Body. Install atomizer assembly, tighten body to position spray orifice opening in the direction of the inlet manifold air flow. Tighten to a minimum torque of ... 6 N·m (53 lb in)
(2) Nut. Tighten nut to a torque of ... 5 ± 1 N·m (45 ± 10 lb in)
NOTE: Since orifice is not visible when installed, an arrow (in same position as orifice) is stamped on one of the flats of the hex nut.
Caterpillar Information System:
3306B GENERATOR SET ENGINE Jacket Water Heater
3306B GENERATOR SET ENGINE Magnetic Pickup
3306B GENERATOR SET ENGINE Shutoff Solenoid Energized To Run
3306B GENERATOR SET ENGINE Switches
3306B GENERATOR SET ENGINE Sending Units
3306B GENERATOR SET ENGINE Sensors
3306B GENERATOR SET ENGINE Digital Tachometer
3306B GENERATOR SET ENGINE Tachometer Calibration Chart
3306B GENERATOR SET ENGINE Electric Starting Motor
3306B GENERATOR SET ENGINE Alternator And Regulator
3306B GENERATOR SET ENGINE Flywheel Housing
3306B GENERATOR SET ENGINE Flywheel
3306B GENERATOR SET ENGINE Ether Start Valve Assembly
3306B GENERATOR SET ENGINE Indicators
3306B GENERATOR SET ENGINE Heat Exchanger Group (If Equipped)
3306B GENERATOR SET ENGINE Systems Operation
3306B GENERATOR SET ENGINE Testing & Adjusting
3306B GENERATOR SET ENGINE Introduction
3306B GENERATOR SET ENGINE Air Filter Elements
3306B GENERATOR SET ENGINE Precleaner
3306B GENERATOR SET ENGINE Fuel Pressure Gauge
3306B GENERATOR SET ENGINE Control Panel
3306B GENERATOR SET ENGINE Crankcase Breather
3306B GENERATOR SET ENGINE Oil Filler Cap