Introduction
Usage:
When the words "use again" are in the description, the specification given can be used to determine if a part can be used again. If the part is equal to or within the specification given, use the part again.
When the word "permissible" is in the description, the specification given is the "maximum or minimum" tolerance permitted before adjustment, repair and/or new parts are needed.
A comparison can be made between the measurements of a worn part and the specifications of a new part to find the amount of wear. A part that is worn can be safe to use if an estimate of the remainder of its service life is good. If a short service life is expected, replace the part.
Reference: See G379, G398 & G399 Engines, Form No. REG01305, for Systems Operation, Testing and Adjusting.
Caterpillar Information System:
G379, G398 & G399 ENGINES Testing And Adjusting
G379, G398 & G399 ENGINES Systems Operation
G333C ENGINE Camshaft Bearings
G333C ENGINE Crankshaft
G333C ENGINE Flywheel Housing
G333C ENGINE Crankshaft Rear Seal
G333C ENGINE Flywheel
G333C ENGINE Cylinder Liners
G333C ENGINE Pistons
G333C ENGINE Valve Seat Inserts
G333C ENGINE Valves
G333C ENGINE Valve Lifters
G379, G398 & G399 ENGINES Engine Design
G379, G398 & G399 ENGINES Fairbanks Morse Ignition System
G379, G398 & G399 ENGINES Setting Of The Magneto Timing - Fairbanks Morse
G379, G398 & G399 ENGINES Pulser Coil - Fairbanks Morse
G379, G398 & G399 ENGINES Generator Coil - Fairbanks Morse
G379, G398 & G399 ENGINES Altronic Ignition System
G379, G398 & G399 ENGINES Magneto Timing - Altronic
G379, G398 & G399 ENGINES Transformers
G379, G398 & G399 ENGINES Spark Plug And Adapters
G379, G398 & G399 ENGINES Spark Plug And Adapters (Shielded Ignition)
G379, G398 & G399 ENGINES Magneto Drive
G379, G398 & G399 ENGINES Gauge For Oil Pressure 3N2780 And 6L2310