Oil Cooler Bypass Valve
Usage:
Remove Oil Cooler Bypass Valve
1. Drain oil filter housing.
2. Remove the valve cover plate. Remove valve spring (3) and plunger (2).
3. Remove clamp retaining bolt (4). Remove valve body mounting bolts (1), and remove valve body.
Install Oil Cooler Bypass Valve
1. Clean all parts thoroughly before assembling valve.
2. Position the valve body (1) on engine, and install mounting bolts.
3. Install clamp retaining bolt.
4. Lubricate the plunger and bore in valve body with clean SAE 30 oil.
5. Install plunger and spring in valve body.
6. Install cover plate.
7. Check the oil level in crankcase and fill as necessary.
Caterpillar Information System:
D349 VEHICULAR ENGINE Testing And Adjusting
D349 VEHICULAR ENGINE Systems Operation
D343 INDUSTRIAL & MARINE ENGINES Crankshaft
D343 INDUSTRIAL & MARINE ENGINES Timing Gear Plate
D343 INDUSTRIAL & MARINE ENGINES Timing Gears
D343 INDUSTRIAL & MARINE ENGINES Flywheel Housing
D343 INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal
D343 INDUSTRIAL & MARINE ENGINES Flywheel
D343 INDUSTRIAL & MARINE ENGINES Sea Water Pump Drive Group
D343 INDUSTRIAL & MARINE ENGINES Sea Water Pump
D343 INDUSTRIAL & MARINE ENGINES Jacket Water Pump
D343 INDUSTRIAL & MARINE ENGINES Cylinder Liners
D349 INDUSTRIAL & MARINE ENGINES Engine Oil Cooler
D349 INDUSTRIAL & MARINE ENGINES Prelube Oil Pump
D349 INDUSTRIAL & MARINE ENGINES Connecting Rod Bearings
D349 INDUSTRIAL & MARINE ENGINES Piston Cooling Tubes
D349 INDUSTRIAL & MARINE ENGINES Oil Pan Base
D349 INDUSTRIAL & MARINE ENGINES Oil Pump
D349 INDUSTRIAL & MARINE ENGINES Crankshaft Main Bearings
D349 INDUSTRIAL & MARINE ENGINES Expansion Tank
D349 INDUSTRIAL & MARINE ENGINES Fuel Filter Housing
D349 INDUSTRIAL & MARINE ENGINES Oil Filter Housing
D349 INDUSTRIAL & MARINE ENGINES Water Temperature Regulators
D349 INDUSTRIAL & MARINE ENGINES Fuel Priming Pump