Air Compressor
Usage:
Remove Air Compressor
1. Remove the coolant from cooling system.
2. Disconnect air lines from air compressor.
3. Disconnect water line (1) and oil line (4) from the compressor. Disconnect oil line (2) from the cylinder block.
4. Remove the bolt (5) from compressor.
5. Remove the nuts (3) that hold air compressor to timing gear plate.
6. Remove the air compressor. Weight of air compressor is 50 lb. (23 kg).
Install Air Compressor
1. Put the air compressor (1) in position on engine, and install the three nuts.
2. Install the bolt that holds oil level guide in position.
3. Connect the two oil lines and water line to the air compressor.
4. Connect the air lines to compressor.
5. Fill the cooling system.
Caterpillar Information System:
1674 DIESEL TRUCK ENGINE Oil Cooler
1674 DIESEL TRUCK ENGINE Water Pump
1674 DIESEL TRUCK ENGINE Bypass Valves
1674 DIESEL TRUCK ENGINE Alternator
1674 DIESEL TRUCK ENGINE Starter
1674 DIESEL TRUCK ENGINE Testing And Adjusting
1674 DIESEL TRUCK ENGINE Systems Operation
7241 MARINE TRANSMISSION Control Valve
7241 MARINE TRANSMISSION Bottom Shaft
7241 MARINE TRANSMISSION Idler Gear
7241 MARINE TRANSMISSION Planetary Gear Section
7241 MARINE TRANSMISSION Top Shaft
1674 DIESEL TRUCK ENGINE Fuel Ratio Control
1674 DIESEL TRUCK ENGINE Fuel Filter Bypass Valve
1674 DIESEL TRUCK ENGINE Housing
1674 DIESEL TRUCK ENGINE Fuel Shutoff Solenoid
1674 DIESEL TRUCK ENGINE Fuel Transfer Pump
1674 DIESEL TRUCK ENGINE Variable Timing Unit
1674 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
1674 DIESEL TRUCK ENGINE Governor
1674 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
1674 DIESEL TRUCK ENGINE Oil Pan
1674 DIESEL TRUCK ENGINE Oil Pump
1674 DIESEL TRUCK ENGINE Piston Cooling Tubes