920 & 930 WHEEL LOADER VEHICLE SYSTEMS Caterpillar

1. Lift the operator's seat.

2. Disconnect oil line (4) from lift kickout slave cylinder (1). Disconnect oil line (3) from bucket positioner slave cylinder (2).

3. Remove the bolts that hold slave cylinders (1) and (2) and remove them from the machine.

4. Put slave cylinders (1) and (2) in position on the back of the hydraulic tank. Install the bolts that hold the cylinders.

5. Connect oil lines (3) and (4) to slave cylinders (2) and (1).

6. Remove (bleed) the air from the bucket positioner and lift kickout systems. See Install Bucket Positioner Master Cylinder for this procedure.

7. Make an adjustment to the slave cylinders. See Bucket Positioner Indicator and Positioner also Lift Kickout in TESTING AND ADJUSTING.