Usage:
NOTE: The bucket is removed for better photo illustration of the tooling position.
| NOTICE |
|---|
Before the machine is lifted, make sure the parking brake is engaged and blocks are in front and behind the tires on the opposite end of the machine. |
1. Lift the machine and put tooling (A) in position under the axle housing as shown.
2. Fasten a hoist to the tire.
3. Remove nuts (1) and remove the rim and tire. The weight of the rim and tire without fluid is:
- 920-320 lb. (144 kg).930-420 lb. (189 kg).
4. Fasten a hoist to the rim and tire and put it in position on the wheel assembly.
5. Install nuts (1) and tighten them to a torque of 365 ± 50 lb.ft. (490 ± 70 N·m).
6. Lift the machine and remove tooling (A). Lower the machine to the ground.
7. See LUBRICATION AND MAINTENANCE GUIDE for correct tire inflation.