4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Caterpillar


Magneto Timing Setting (Solid State Magneto)

Usage:


LATER Typical Example


EARLIER Typical Example

Magneto Timing Settings. No adjustment is needed if each spark angle is larger or smaller the same amount between each cylinder test switch position. Make adjustments at screw on potentiometers on later magnetos at (1) and earlier magnetos at (2).

Caterpillar Information System:

4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Pulser Coil (Solid State Magneto)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Generator Coil (Solid State Magneto)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Transformer (Solid State Magneto)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Silicon Controlled Ignition System (Solid State Magneto)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Air Compressor 9L4104 or 9L5366 (Bendix-Westinghouse Tu-Flo 500)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Water Temperature Contactor Switches
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Oil Pressure Gauge (6L2310)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Water Temperature Gauge (6L2311)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Fan Drive Belt Tightener (2N2028, 2N2029)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Output Shaft Governor (8L8661)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Front Power Take-Off (1N7309, 2F8223)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Enclosed Clutches Rear Clutch (2R6853, 6L6467, 7L6542) (2N7078, 2N6961)
4.75" BORE INDUSTRIAL & MARINE ENGINE ATTACHMENTS Ignition System Timing
D343 ENGINE Systems Operation
D343 ENGINE Air Compressor (9L4092) (BW281020)
D343 ENGINE Camshaft And Follower
D343 ENGINE Camshaft
D343 ENGINE Accessory Drive
D343 ENGINE Valves
D343 ENGINE Camshaft Drive And Idler Gears
D343 ENGINE Valve Guide And Seat Inserts
D343 ENGINE Vibration Damper
D343 ENGINE Piston And Rings
D343 ENGINE Cylinder Liner
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.