D399, G399, D398, G398, D379, G379 ENGINES Caterpillar


Prelube Pump; (Later Type)

Usage:



Viking Pump Co., Model HJ75M, Internal gear pump:

Output with pump at 1150 rpm ... 15 U.S. gpm(56,8 lit/min)

Pressure using 750 SUS oil ... 25 psi(1,75 kg/cm2)

(1) Depth of bore in housing ... 2.207 in.(50,98 mm)

(2) End clearance of rotor (adjust with 2N7522 Gasket kit) ... .003-.005 in.(0,076-0,127 mm)

Caterpillar Information System:

D399, G399, D398, G398, D379, G379 ENGINES Prelube Motor Relay; (Later Type)
D399, G399, D398, G398, D379, G379 ENGINES Prelube Pump Motor; (Later Type)
D399, G399, D398, G398, D379, G379 ENGINES Prelube Oil Pump And Motor; (Early Type)
D399, G399, D398, G398, D379, G379 ENGINES Vibration Damper
D399, G399, D398, G398, D379, G379 ENGINES Manifold
D399, G399, D398, G398, D379, G379 ENGINES Temperature Regulator
D399, G399, D398, G398, D379, G379 ENGINES Fresh And Auxiliary Water Pumps; (4L8800, 6L8983, 6L4754, 2N955 And 7L3222)
D399, G399, D398, G398, D379, G379 ENGINES Cooling System Pressure Cap
D399, G399, D398, G398, D379, G379 ENGINES Engine Mounted Fan
D399, G399, D398, G398, D379, G379 ENGINES Governor Control Linkage<BR> (Hydra-Mechanical)
D399, G399, D398, G398, D379, G379 ENGINES Fuel Pump And Governor Drive
D399, G399, D398, G398, D379, G379 ENGINES Fuel Transfer Pump; (6L9697 And 1N5415)
D399, G399, D398, G398, D379, G379 ENGINES Cylinder Block
D399, G399, D398, G398, D379, G379 ENGINES Piston And Rings
D399, G399, D398, G398, D379, G379 ENGINES Connecting Rod
D399, G399, D398, G398, D379, G379 ENGINES Cylinder Head
D399, G399, D398, G398, D379, G379 ENGINES Governor; (7L8787, 8L5814 and 7L4352)
D399, G399, D398, G398, D379, G379 ENGINES Flywheel
D399, G399, D398, G398, D379, G379 ENGINES Flywheel Housing
D399, G399, D398, G398, D379, G379 ENGINES Fuel Ratio Control; (8S6419)
D399, G399, D398, G398, D379, G379 ENGINES Silicon Controlled Ignition System; (Solid State Magneto)
D399, G399, D398, G398, D379, G379 ENGINES Generator Coil; (Solid State Magneto)
D399, G399, D398, G398, D379, G379 ENGINES Pulser Coil; (Solid State Magneto)
D399, G399, D398, G398, D379, G379 ENGINES Magneto Timing Setting; (Solid State Magneto)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.