Usage:
02Jul2013 |
(Revised 23Jul2013) |
Before/After | PRODUCT SUPPORT PROGRAM FOR INSTALLING 3307379/">330-7379 FUEL LINE ON CERTAIN G3516, AND G3516B ENGINES |
|
1270 | PS43947 |
NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43947" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
NOTE: | This Revised Service Letter replaces the 02Jul2013 Service Letter. Changes have been made to the Title, Problem, and Affected Product. |
TERMINATION DATE |
31Jul2015 |
PROBLEM
The existing 3307379/">330-7379 Fuel Line can crack on certain G3516, and G3516B Engines if high vibration is present and fuel line was not installed correctly. |
AFFECTED PRODUCT
Model | Identification Number |
G3516 | 3RC00080, 988 4EK01410, 1671, 1699, 1702, 1726, 1757, 1810, 3056, 3231, 3415, 3581, 3617, 3622, 3655, 3668, 3688, 3720-3721, 3758, 3768, 3831-3832, 3862-3863, 3904, 3906, 3909-3910, 3922, 3924-3925, 4014, 4025, 4233, 4481, 4593, 4609, 4612, 4625, 4896-4897, 4907, 4915, 5044 8LD00077 WPW00112-00113, 123, 134, 168, 239, 278, 397, 413, 429, 449, 462, 471, 670, 680, 682, 725, 760, 875, 888, 926, 967, 1010, 1590, 1966, 2017, 2454, 2610, 2640, 2692, 2837 |
G3516B | JEF00101-00189, 1001-2230 |
PARTS NEEDED
Qty |
Part Number | Description |
2 | 3B1915 | BOLT |
2 | 9D6196 | CLIP |
2 | 9D6197 | CLIP |
2 | 9S8752 | NUT-FULL |
4 | 9X6458 | WASHER-HARD |
1 | 3307379 | TUBE AS |
2 | 3441950 | CLIP-HALF SLOT |
2 | 3441951 | CLIP-HALF TAB |
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 14% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. |
ACTION REQUIRED
Refer to SEBD9877, Engine News, "A New Tube Assembly Is Now Used On Certain G3516, G3516B, and G3520B Engines " for the Rework Procedure. |
SERVICE CLAIM ALLOWANCES
0-108 mo |
NOTE: This is a 2.0-hour job | ||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |