PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS Caterpillar

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS

Usage:

REBE8964-00

Show/hide table

05Feb2013

U-42

D-38

Show/hide table

*Priority*	PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS
3160		PI32141

Show/hide table

NOTE:

This Program must be administered as soon as possible. When reporting the repair, use "PI32141" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI32141" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.

Show/hide table

NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

Show/hide table

COMPLETION DATE	TERMINATION DATE
31Aug2013	28Feb2014

PROBLEM

Show/hide table

The B3 planetary ball bearing needs to be replaced on certain TH55-E70 Frac transmissions. The existing bearing can wear prematurely due to axial load.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
TH55 FT-E70	PCJ00300-00304, 315, 319-320, 336-339, 341, 347-350, 357-359, 362-364, 369, 375-379, 381-384, 394, 400, 403, 412, 415-417, 424, 433, 439, 455, 467

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
1	3S8035	RING-SEAL
1	5D7523	SEAL-O-RING
1	5M6141	RING-METAL SEAL
1	5P5846	SEAL-O-RING
1	7G6373	GASKET
2	8C3107	SEAL-O-RING
2	8E3838	RING-SEAL
6	8M5254	SEAL-O RING
1	8P8950	RING-SEAL
2	8T0315	SEAL-O-RING-ORFS
1	9F7383	RING-METAL SEAL
1	9L1480	GASKET
1	1243307	BRG-SPL BALL
1	1478089	BEARING-BALL
1	1536959	RING - SEAL
1	1698373	BOTTLE GP-FLUID
2	3283655	ELEMENT AS-XMSN
1	3694015	BEARING-SPL BALL
1	BULKOIL	265 Liters (70 Gal) TDTO Oil (See OMM)
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 45% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table

Refer to the Service Manual if/as required.

Perform ECM download prior to transmissions removal. Complete product status report including histograms for engine and transmission.

Obtain oil samples from transmission sample port prior to removal and provide SOS results (particle count & wear metals) in SIMSI entry.

Perform removal and disassembly of the transmission.

Replace the 124-3307 Bearing in position "B3" with a 369-4015 Bearing and permanently mark the removed bearing with the transmission serial number, "B3", and "output end" indicating installed direction.

Replace the 124-3307 Bearing in position "B4" with a new 124-3307 Bearing and permanently mark the removed bearing with the transmission serial number, "B4", and "output end" indicating installed direction.

Using a dial indicator, measure the bearing endplay in the removed 124-3307 Bearings Document this endplay by filing a SIMSI entry.

Perform assembly and installation of the transmission.

Perform Fill Calibration of the transmission and functional checks.

Show/hide table

Image1

OWNER NOTIFICATION

Show/hide table

U.S. and Canadian owners will receive the attached Owner Notification.

SERVICE CLAIM ALLOWANCES

Show/hide table

Caterpillar		Dealer Suggested		Customer Suggested
Parts %	Labor Hrs%	Parts %	Labor Hrs%	Parts %	Labor Hrs%
100%	100%	0%	0%	0%	0%

Show/hide table

NOTE: This is a 90.0-hour job

Show/hide table

PARTS DISPOSITION

Show/hide table

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.

Show/hide table

COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS

XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999

PRIORITY - Replacing the B3 Planetary Ball Bearing on Certain TH55-E70 Frac Transmissions

MODELS INVOLVED - TH55-E70 Frac

Dear Caterpillar Product Owner:

The B3 planetary ball bearing needs to be replaced on the products listed below. The existing ball bearing can wear prematurely due to axial load. You will not be charged for the service performed.

Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service.

Please refer the dealer to their Service Letter dated 05Feb2013 when scheduling this service.

We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.

Caterpillar Inc.

Identification #(s)

Attached to 05Feb2013 Service Letter