PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVING CERTAIN 312-4545 OIL PUMPS FROM DEALER PART STOCK
Usage:
REBE8113-01
Show/hide table
| 01Mar2012 |
| (Revised 01Mar2012) |
U-109
A-90
D-96
O-104
Show/hide table
| Parts stock action only | PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVING CERTAIN 312-4545 OIL PUMPS FROM DEALER PART STOCK |
|
| 7750 | PI70422 |
|
Show/hide table
| NOTE: | When submitting claim for Parts Stock Action, Use the appropriate 99Z as the s/n, the appropriate Service Letter Program Number as the Part number in the Part Causing Failure field, "7751" as the Group Number, "56" as the Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
| NOTE: | This Revised Service Letter replaces the 01Mar2012 Service Letter. A change has been made to the Mail Codes. |
Show/hide table
TERMINATION DATE |
| 30Jun2012 |
PROBLEM
Show/hide table
| Certain 312-4545 Oil Pumps need to be inspected and possibly removed from dealer parts stock. |
ACTION REQUIRED
Show/hide table
| Inspect all 312-4545 Oil Pumps in dealer parts stock to check the date code on the foot of the oil pump. The date code 10G01001 where 10 is the year, G is the month (G = July), 01 is the day and the last 3 digits are consecutive number. 11E20999 is the 999th pump built on 20th May 2011. If the date code on the oil pump is "10G01001" to "11E20999", remove the oil pump from dealer parts stock. If the date code on the oil pump is not "10G01001" to "11E20999", mark the packaging to indicate it has been inspected according to this program (PI7####) and return the oil pump to dealer parts stock. |
Show/hide table
 |
| Image1 |
 |
| Image2 |
SERVICE CLAIM ALLOWANCES
Show/hide table
| Submit one claim for all parts removed from dealer parts stock. |
PARTS DISPOSITION
Show/hide table
| ***** NACD ***** Hold all oil pumps for a Parts Return Request (PRR). A Parts Return Request (PRR) will be issued to you through the Send-It-Back process after the claim is submitted. Make sure to list the service letter program number on the packing slip and include the closed work order paperwork. ***** EAME, LACD, and APD ***** Hold all oil pumps for 30 days for a possible Parts Return Request (PRR). Make sure to list the service letter program number on the packing slip and include the closed work order paperwork. If a Parts Return Request (PRR) is not issued to you after 30 days through the Send-It-Back process, handle the parts in accordance with your warranty bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR INSTALLING DRAIN HOSES ON THE MOTOR CAVITY ON 286-4571 AND 338-3708 ELECTRONIC THERMOSTATS ON CERTAIN C175-16 PETROLEUM GENERATOR SET ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING DRAIN HOSES ON THE MOTOR CAVITY ON 286-4571 AND 338-3708 ELECTRONIC THERMOSTATS ON CERTAIN C175-16 PETROLEUM GENERATOR SET ENGINES
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN VANE PUMP REMAN CARTRIDGE KITS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN VANE PUMP REMAN CARTRIDGE KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILTER ELEMENTS ON CERTAIN C175 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILTER ELEMENTS ON CERTAIN C175 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BRACKET FOR TWIN CYLINDER AIR COMPRESSORS ON CERTAIN C15 AND C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE BRACKET FOR TWIN CYLINDER AIR COMPRESSORS ON CERTAIN C15 AND C18 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN C9 MARINE AUXILIARY AND GENERATOR SET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN C9 MARINE AUXILIARY AND GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VOLTAGE ADJUST POTENTIOMETER ON CERTAIN C2.2, C4.4, AND C6.6 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE VOLTAGE ADJUST POTENTIOMETER ON CERTAIN C2.2, C4.4, AND C6.6 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 242-8824 PRESSURE SENSOR GROUP FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 242-8824 PRESSURE SENSOR GROUP FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRONIC MODULAR CONTROL PANEL (EMCP) ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRONIC MODULAR CONTROL PANEL (EMCP) ON CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR FAN BELT GUARD BRACKET ON CERTAIN 3512C, AND 3516C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR FAN BELT GUARD BRACKET ON CERTAIN 3512C, AND 3516C GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING UPDATED SOFTWARE ON CERTAIN C9.3 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING UPDATED SOFTWARE ON CERTAIN C9.3 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 162-7512 COMBUSTION SENSORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 162-7512 COMBUSTION SENSORS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SUPPORT LACING ON THE MAIN ROTORS ON CERTAIN 3516B, 3516C, 3516C HD, AND C175-16 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SUPPORT LACING ON THE MAIN ROTORS ON CERTAIN 3516B, 3516C, 3516C HD, AND C175-16 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN CYLINDER PACK ASSEMBLIES OR INSPECTING AND POSSIBLY REWORKING PISTON PIN RETAINERS ON CERTAIN CYLINDER PACK ASSEMBLIES IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN CYLINDER PACK ASSEMBLIES OR INSPECTING AND POSSIBLY REWORKING PISTON PIN RETAINERS ON CERTAIN CYLINDER PACK ASSEMBLIES IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES IN A LOCOMOTIVE GENERATOR SET APPLICATION PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES IN A LOCOMOTIVE GENERATOR SET APPLICATION
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE EMISSIONS LABEL ON CERTAIN SPF343C TRAILER MOUNTED PUMPERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE EMISSIONS LABEL ON CERTAIN SPF343C TRAILER MOUNTED PUMPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 162-7512 COMBUSTION SENSOR ON CERTAIN G3612, AND G3616 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 162-7512 COMBUSTION SENSOR ON CERTAIN G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES IN MT865, AND MT875 AGCO TRACTORS PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES IN MT865, AND MT875 AGCO TRACTORS