PRODUCT SUPPORT PROGRAM FOR INSTALLING DRAIN HOSES ON THE MOTOR CAVITY ON 286-4571 AND 338-3708 ELECTRONIC THERMOSTATS ON CERTAIN C175-16 PETROLEUM GENERATOR SET ENGINES
Usage:
REBE8111-00
Show/hide table
| 02Mar2012 |
U-113
D-99
O-108
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR INSTALLING DRAIN HOSES ON THE MOTOR CAVITY ON 286-4571 AND 338-3708 ELECTRONIC THERMOSTATS ON CERTAIN C175-16 PETROLEUM GENERATOR SET ENGINES |
|
| 5927 | PS43524 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43524" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Mar2014 |
PROBLEM
Show/hide table
| The existing electronic thermostat motor cavity has no vent or drain feature on certain C175-16 Petroleum Generator Set Engines. During heating and cooling water may enter the electronic thermostat motor cavity. If the drain hoses are not installed water will not drain and the electric motors will corrode. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C175-16 | P6L00100-00103, 105-160 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 2 | 1P4278 | CLAMP-HOSE |
| 70 | 5P9770 | HOSE |
| 2 | 9S9332 | FITTING-ELBOW |
| 2 | 3065494 | CLIP-LOOP |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 7% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Refer to the attached Rework Procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-24 mo |
||||||
Show/hide table
| NOTE: This is a 1.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Show/hide table
| Remove Separate Circuit After Cooler (SCAC) electronic thermostat motor cover. |
 |
| Image1.1.1 |
| Drill and tap for 1/16"-27 NPTF threads per Image1.2.1. |
 |
| Image1.2.1 |
| Install a 9S-9332 Elbow, 35 cm of 5P-9770 Hose, 1P-4278 Hose Clamp, and 306-5494 Clip. |
 |
| Image1.3.1 |
| Remove Jacket Water (JW) electronic thermostat motor cover. |
 |
| Image1.4.1 |
| Drill and tap for 1/16"-27 NPTF threads per Image1.5.1. |
 |
| Image1.5.1 |
| Install 9S-9332 Elbow, 35 cm of 5P-9770 Hose, 1P-4278 Hose Clamp, and 306-5494 Clip. Parts have been removed for clarity. |
 |
| Image1.6.1 |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVE CERTAIN 4W-5719 ADAPTERS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN VANE PUMP REMAN CARTRIDGE KITS IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN VANE PUMP REMAN CARTRIDGE KITS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILTER ELEMENTS ON CERTAIN C175 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL FILTER ELEMENTS ON CERTAIN C175 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BRACKET FOR TWIN CYLINDER AIR COMPRESSORS ON CERTAIN C15 AND C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE BRACKET FOR TWIN CYLINDER AIR COMPRESSORS ON CERTAIN C15 AND C18 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN C9 MARINE AUXILIARY AND GENERATOR SET ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN C9 MARINE AUXILIARY AND GENERATOR SET ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE VOLTAGE ADJUST POTENTIOMETER ON CERTAIN C2.2, C4.4, AND C6.6 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE VOLTAGE ADJUST POTENTIOMETER ON CERTAIN C2.2, C4.4, AND C6.6 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 242-8824 PRESSURE SENSOR GROUP FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING THE 242-8824 PRESSURE SENSOR GROUP FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING THE CYLINDER PACKS AND POSSIBLY CHANGE THE ENGINE OIL ON CERTAIN G3300 NATURALLY ASPIRATED ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRONIC MODULAR CONTROL PANEL (EMCP) ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE ELECTRONIC MODULAR CONTROL PANEL (EMCP) ON CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE B3 PLANETARY BALL BEARING ON CERTAIN TH55-E70 FRAC TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR FAN BELT GUARD BRACKET ON CERTAIN 3512C, AND 3516C GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE RADIATOR FAN BELT GUARD BRACKET ON CERTAIN 3512C, AND 3516C GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON CERTAIN 3512C OIL WELL SERVICE ENGINES, AND C32 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON CERTAIN 3512C OIL WELL SERVICE ENGINES, AND C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVING CERTAIN 312-4545 OIL PUMPS FROM DEALER PART STOCK PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REMOVING CERTAIN 312-4545 OIL PUMPS FROM DEALER PART STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING UPDATED SOFTWARE ON CERTAIN C9.3 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING UPDATED SOFTWARE ON CERTAIN C9.3 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 162-7512 COMBUSTION SENSORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 162-7512 COMBUSTION SENSORS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SUPPORT LACING ON THE MAIN ROTORS ON CERTAIN 3516B, 3516C, 3516C HD, AND C175-16 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE SUPPORT LACING ON THE MAIN ROTORS ON CERTAIN 3516B, 3516C, 3516C HD, AND C175-16 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN CYLINDER PACK ASSEMBLIES OR INSPECTING AND POSSIBLY REWORKING PISTON PIN RETAINERS ON CERTAIN CYLINDER PACK ASSEMBLIES IN DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN CYLINDER PACK ASSEMBLIES OR INSPECTING AND POSSIBLY REWORKING PISTON PIN RETAINERS ON CERTAIN CYLINDER PACK ASSEMBLIES IN DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES IN A LOCOMOTIVE GENERATOR SET APPLICATION PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW ENGINE SOFTWARE ON CERTAIN C18 INDUSTRIAL ENGINES IN A LOCOMOTIVE GENERATOR SET APPLICATION
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE EMISSIONS LABEL ON CERTAIN SPF343C TRAILER MOUNTED PUMPERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING THE EMISSIONS LABEL ON CERTAIN SPF343C TRAILER MOUNTED PUMPERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 162-7512 COMBUSTION SENSOR ON CERTAIN G3612, AND G3616 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 162-7512 COMBUSTION SENSOR ON CERTAIN G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE SOFTWARE ON CERTAIN C27 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE PISTON PACKS ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE EXCITER ROTOR ON CERTAIN 3512 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING THE CRANKSHAFT, CRANKSHAFT DOWELS, DAMPER ADAPTER, AND DAMPER AT OVERHAUL ON CERTAIN C175-16 GENERATOR SETS AND LOCOMOTIVE ENGINES