PRODUCT SUPPORT PROGRAM FOR REPLACING THE 162-9608 UNIT INJECTOR HYDRAULIC PUMP ON CERTAIN 3126B GEN SET ENGINES
Usage:
REBE7199-00
Show/hide table
| 09Jun2011 |
U-235
Show/hide table
| After Failure Only | PRODUCT SUPPORT PROGRAM FOR REPLACING THE 162-9608 UNIT INJECTOR HYDRAULIC PUMP ON CERTAIN 3126B GEN SET ENGINES |
|
| 1714 | PS52035 |
|
Show/hide table
| NOTE: | This Program can only be administered after a failure occurs. The decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS52035" as the Part Number and "7755" as the Group Number. Use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 30Jun2013 |
PROBLEM
Show/hide table
| The existing 162-9612 Fuel Transfer Pump Group that is part of the 162-9608 Unit Injector Hydraulic Pump Group can fail on certain 3126B Gen Set Engines. The failure has been associated to undersized splines inside of the fuel transfer pump. This may cause an accelerated wear to the splines of the fuel transfer pump and the unit injector hydraulic pump. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3126B | BDZ00012-00013, 24-38, 49-105, 107-350, 357-364, 369-631, 650-972, 981-986, 994-1027, 1029-1288, 1290-1471, 1487-1497, 1559-2522 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 20R0122 | PUMP GP-INJECTOR |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 3% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Replace the failed 162-9608 Unit Injector Hydraulic Pump Group with a 20R-0122 Unit Injector Hydraulic Pump Group. Note: Refer to Image1 to determine that the correct part is being installed. The correct fuel transfer pumps will have an "H" stamped in the part. Refer to SENR9589, Disassembly and Assembly for instructions on the removal and installation of the unit injector hydraulic pump. |
Show/hide table
 |
| Image1 |
SERVICE CLAIM ALLOWANCES
Show/hide table
0-72 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW GASKETS ON CERTAIN C9 ENGINES INSTALLED IN MASS TRANSIT BUSES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW GASKETS ON CERTAIN C9 ENGINES INSTALLED IN MASS TRANSIT BUSES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN 3512C OIL WELL SERVICE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW SOFTWARE ON CERTAIN 3512C OIL WELL SERVICE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RELABELING THE ENGINE EMISSIONS LABEL ON CERTAIN 3054C REMAN ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RELABELING THE ENGINE EMISSIONS LABEL ON CERTAIN 3054C REMAN ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN SPEEDOMETER AND TACHOMETER MODULE GP FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN SPEEDOMETER AND TACHOMETER MODULE GP FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CUSTOMER CONNECTOR (40 PIN) ON 289-2491 ENGINE HARNESS ON 3512C OIL WELL SERVICING ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE CUSTOMER CONNECTOR (40 PIN) ON 289-2491 ENGINE HARNESS ON 3512C OIL WELL SERVICING ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OIL COOLER CORES ON CERTAIN 3516C MARINE PROPULSION ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE ENGINE OIL COOLER CORES ON CERTAIN 3516C MARINE PROPULSION ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTAT HOUSING ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTAT HOUSING ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTAT HOUSING ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE THERMOSTAT HOUSING ON CERTAIN C32 MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM TO REMOVE AND INSPECT CERTAIN REMANUFACTURED CYLINDER PACKS AND CONNECTING RODS FOR 3500 HIGH DISPLACEMENT ENGINES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM TO REMOVE AND INSPECT CERTAIN REMANUFACTURED CYLINDER PACKS AND CONNECTING RODS FOR 3500 HIGH DISPLACEMENT ENGINES FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 289-0585 VALVE GROUP ON CERTAIN 770, 772, 773F, 773F OEM, 775E OEM, 775F, 777F, AND 777F OEM TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 289-0585 VALVE GROUP ON CERTAIN 770, 772, 773F, 773F OEM, 775E OEM, 775F, 777F, AND 777F OEM TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSPECTING, REPLACING OR REPAIRING 10R-1495 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING, REPLACING OR REPAIRING 10R-1495 REMANUFACTURED CYLINDER HEADS ON CERTAIN G3606, G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL STANDPIPES ON CERTAIN C4.4 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL STANDPIPES ON CERTAIN C4.4 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOUNTING BOLTS FOR THE RADIATOR BASE TO GENSET BASE ON CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REWORKING THE MOUNTING BOLTS FOR THE RADIATOR BASE TO GENSET BASE ON CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 7N-2405 CONNECTING ROD BOLTS FOR 3500 AND G3500 ENGINES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL INJECTORS ON CERTAIN C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING FUEL INJECTORS ON CERTAIN C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR RESEALING ALL THE CYLINDER HEAD TO BLOCK JOINTS ON CERTAIN CERTAIN TH55 KRESS COAL HAULERS PRODUCT SUPPORT PROGRAM FOR RESEALING ALL THE CYLINDER HEAD TO BLOCK JOINTS ON CERTAIN CERTAIN TH55 KRESS COAL HAULERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 301-6663 SPARK PLUGS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 301-6663 SPARK PLUGS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 124-3307 BALL BEARING IN THE B3 LOCATION ON CERTAIN TH55-E70 TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 124-3307 BALL BEARING IN THE B3 LOCATION ON CERTAIN TH55-E70 TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT IN CHASSIS ON CERTAIN TH55 KRESS COAL HAULERS PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT IN CHASSIS ON CERTAIN TH55 KRESS COAL HAULERS
PRODUCT SUPPORT PROGRAM FOR THE OPTIONAL ENGINE BLOCK HEATER (MAY BE MISSING A SUPPLY POWER FUSE-HOLDER AND A FUSE) ON CERTAIN C15 AND C18 GENSETS PRODUCT SUPPORT PROGRAM FOR THE OPTIONAL ENGINE BLOCK HEATER (MAY BE MISSING A SUPPLY POWER FUSE-HOLDER AND A FUSE) ON CERTAIN C15 AND C18 GENSETS
PRODUCT SUPPORT PROGRAM FOR REPLACING 0.75", 1.0", 1.25", AND 1.5" XT6 HYDRAULIC HOSES ON CERTAIN 345D HYDRAULIC EXCAVATORS PRODUCT SUPPORT PROGRAM FOR REPLACING 0.75", 1.0", 1.25", AND 1.5" XT6 HYDRAULIC HOSES ON CERTAIN 345D HYDRAULIC EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR MODIFYING THE DOOR LATCH MECHANISM ON CERTAIN C2.2, C4.4, AND C6.6 RENTAL GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR MODIFYING THE DOOR LATCH MECHANISM ON CERTAIN C2.2, C4.4, AND C6.6 RENTAL GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE 321-0064 ATAAC CORE ASSEMBLY ON CERTAIN C11, C13, AND C15 ENGINES PRODUCT SUPPORT PROGRAM FOR REPAIRING THE 321-0064 ATAAC CORE ASSEMBLY ON CERTAIN C11, C13, AND C15 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING R450 VOLTAGE REGULATOR ON CERTAIN C6.6 GENERATOR SETS AND XQ175 RENTAL GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR REPLACING R450 VOLTAGE REGULATOR ON CERTAIN C6.6 GENERATOR SETS AND XQ175 RENTAL GENERATOR SETS