PRODUCT SUPPORT PROGRAM FOR REWORKING THE CONNECTING ROD BOLTS ON CERTAIN 3606, 3608, 3612, 3616, C280-8, C280-12, AND C280-16 MARINE ENGINES Caterpillar
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CONNECTING ROD BOLTS ON CERTAIN 3606, 3608, 3612, 3616, C280-8, C280-12, AND C280-16 MARINE ENGINES
Usage:
REBE6764-02
Show/hide table
04Mar2011
(Revised 01Apr2011)
D241
D244
U060
U150
U170
Show/hide table
Before/After
(Limited distribution)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CONNECTING ROD BOLTS ON CERTAIN 3606, 3608, 3612, 3616, C280-8, C280-12, AND C280-16 MARINE ENGINES
1218 1225
PS43240
Show/hide table
NOTE:
This Program must be administered either before or after failure.
In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43240" as the Part Number
and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code.
If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Show/hide table
NOTE:
The information supplied in this service letter may not be valid after the termination date of this program.
Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Show/hide table
Show/hide table
NOTE:
This Revised Service Letter replaces the 04Mar2011 Service Letter. Changes have been made to the Service Claim Allowance to allow for reasonable travel and mileage charges.
Show/hide table
TERMINATION DATE
31Mar2013
PROBLEM
Show/hide table
The existing 1W-0098 and 355-4969 Connecting Rod Bolts can fail on certain 3606, 3608, 3612, 3616, C280-8, C280-12, and C280-16 marine engines. If the existing connecting rod bolt fails, it can damage the liner, spray jet, rod, or engine block.
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 29% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
Show/hide table
Replace the existing 1W-0098 and 355-4969 Connecting Rod Bolts and nuts with new 369-7181 Bolts and 250-0640 Nuts.
Refer to the attached Rework Procedure for details.
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
*******Group 1*******
0-200000 hrs, 0-252 mo
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
NOTE: This is a 26.5-hour job for Group 1
When the parts order is placed, please reference the service letter number in the customer reference field.
Reasonable travel time and mileage will be allowed when performing this rework procedure. Include details in the claim story.
Dealers in Brazil are unable to order 334-0519 Grease from the Cat system. Purchase 67700-CAPT Bel-Ray Molylube Anti-Seize Lubricant directly from the supplier or from an industrial supply house and claim as a miscellaneous expense. One tube is allowed per engine.
Show/hide table
Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
*******Group 2*******
0-200000 hrs, 0-252 mo
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
NOTE: This is a 32.0-hour job for Group 2
When the parts order is placed, please reference the service letter number in the customer reference field.
Reasonable travel time and mileage will be allowed when performing this rework procedure. Include details in the claim story.
Dealers in Brazil are unable to order 334-0519 Grease from the Cat system. Purchase 67700-CAPT Bel-Ray Molylube Anti-Seize Lubricant directly from the supplier or from an industrial supply house and claim as a miscellaneous expense. One tube is allowed per engine.
Show/hide table
Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
*******Group 3*******
0-200000 hrs, 0-252 mo
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
NOTE: This is a 43.0-hour job for Group 3
When the parts order is placed, please reference the service letter number in the customer reference field.
Reasonable travel time and mileage will be allowed when performing this rework procedure. Include details in the claim story.
Dealers in Brazil are unable to order 334-0519 Grease from the Cat system. Purchase 67700-CAPT Bel-Ray Molylube Anti-Seize Lubricant directly from the supplier or from an industrial supply house and claim as a miscellaneous expense. One tube is allowed per engine.
Show/hide table
Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
*******Group 4*******
0-200000 hrs, 0-252 mo
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
NOTE: This is a 54.0-hour job for Group 4
When the parts order is placed, please reference the service letter number in the customer reference field.
Reasonable travel time and mileage will be allowed when performing this rework procedure. Include details in the claim story.
Dealers in Brazil are unable to order 334-0519 Grease from the Cat system. Purchase 67700-CAPT Bel-Ray Molylube Anti-Seize Lubricant directly from the supplier or from an industrial supply house and claim as a miscellaneous expense. Two tubes are allowed per engine.
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
The rod bolts and nuts must be replaced on all cylinders. Replace the bolts two at a time using the following procedure. This procedure will allow the joint to remain closed and reduce the chance of debris entering the rod bearing running surface. The rod cap is not to be removed at any time.
BOLT INSTALLATION PROCEDURE
NOTE: Refer to Image1.1.1 and Image1.1.2. Holes (1) and (2) are on the same side of the connecting rod as the bearing tab slot (5). Hole (1) is on the side next to the serial number pad (6).
1. Loosen the nuts on bolts (2) and (3) and retighten to finger tight. Loosen nuts on bolts (1) and (4) and retighten to finger tight. Keep the nuts snug to keep the joint closed and prevent debris from entering the bearing.
2. Loosen nuts on bolts (2) and (3) and remove bolts for replacement.
NOTE: For 6- and 8-cylinder engines, it is acceptable to replace bolts (1) and (2) instead of bolts (2) and (3) during this step. Loosen nuts on bolts (1) and (2) and remove for replacement.
NOTE: If the crankshaft needs to be rotated in order to remove the bolts there should be a minimum of 105 Nm (75 +/- 10 lb ft) of torque applied to all four bolts in order to prevent the bearing from rotating out of position.
3. Clean the 4W-8344 Retainer and clean the bolt heads of the new bolts. The parts must be clean and dry.
4. Install new 369-7181 connecting rod bolts. Apply 334-0519 Grease (67700-CAPT Bel-Ray Molylube Anti-Seize Lubricant) on the bolt threads, nut threads, and nut seating face AFTER the new bolt is installed in the rod.
NOTE: DO NOT use Molykote GN with this procedure. The bolt should not be forced into the hole.
5. Turn the two new nuts by hand until they contact the cap face. Threading the nuts by hand provides an opportunity to identify problems with the threads. There should be no resistance felt that would indicate thread damage or debris in the threads. If the nuts and/or bolts cannot be threaded by hand, they should be replaced. Do not run the nuts up to the cap face with a torque gun.
6. Loosen the nuts on bolts (1) and (4) and remove bolts for replacement.
NOTE: For 6- and 8-cylinder engines, it is acceptable to replace bolts (3) and (4) instead of bolts (1) and (4) during this step. Loosen nuts on bolts (3) and (4) and remove for replacement.
NOTE: If the crankshaft needs to be rotated in order to remove the bolts there should be a minimum of 105 Nm (75 +/- 10 lb ft) of torque applied to all four bolts in order to prevent the bearing from rotating out of position.
7. Clean the 4W-8344 Retainer and clean the bolt heads of the new bolts. The parts must be clean and dry.
8. Install new 369-7181 connecting rod bolts. Apply 334-0519 Grease (67700-CAPT Bel-Ray Molylube Anti-Seize Lubricant) on the bolt threads, nut threads, and nut seating face AFTER the new bolt is installed in the rod.
NOTE: DO NOT use Molykote GN with this procedure. The bolt should not be forced into the hole.
9. Turn the two new nuts by hand until they contact the cap face. Threading the nuts by hand provides an opportunity to identify problems with the threads. There should be no resistance felt that would indicate thread damage or debris in the threads. If the nuts and/or bolts cannot be threaded by hand, they should be replaced.
NOTE: Do not run the nuts up to the cap face with a torque gun.
Image1.1.1
Image1.1.2
BOLT TIGHTENING PROCEDURE
Refer to the new connecting rod bolt tightening procedure in Engine News SEBD9672 and appropriate Specification manual SENR3592 (3612 and 3616 engines), SENR3598 (3606 and 3608 engines), or RENR5082 (all C280 engines).
The 369-7181 Connecting Rod Bolts have the Intellifast chip installed in the end of the bolt. This technology allows the installer to verify the bolt stretch after installation. After all bolts are installed and the tightening procedure has been completed, the actual bolt load can be verified using the Intellifast reader.