PRODUCT SUPPORT PROGRAM FOR REWORKING THE EJECTOR BUCKET ASSEMBLY ON CERTAIN R1700G LOAD HAUL DUMP MACHINES
Usage:
REBE6368-00
Show/hide table
| 23Dec2010 |
U-530
A-436
O-466
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REWORKING THE EJECTOR BUCKET ASSEMBLY ON CERTAIN R1700G LOAD HAUL DUMP MACHINES |
|
| 6128 | PS43213 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS43213" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
Show/hide table
TERMINATION DATE |
| 31Dec2011 |
PROBLEM
Show/hide table
| The existing ejector bucket assembly can interfere with the ejector cylinders on certain R1700G Load Haul Dump Machines. If the existing ejector bucket assembly interferes, it can cause damage to the ejector cylinders. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| R1700G | 8XZ00421 SBR00531, 541, 610, 622, 673-674, 678, 704, 725-726 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 24 | 1868239 | BUNG |
| 24 | 2137583 | PLUG |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 32% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Refer to Special Instruction, REHS5276, for the Rework Procedure. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-12 mo |
||||||
Show/hide table
| NOTE: This is a 12.0-hour job
If there has been a previous repair, part age/hours will apply. Retain a copy of the previous repair invoice in the dealer's records for audit purposes, and specify repair date and machine hours in the "Additional Comments" section of the warranty claim. |
||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR CLEANING THE BEARING SURFACES OF THE CONNECTING ROD AND BEARING CAP FACES AND REPLACING THE CONNECTING ROD BEARINGS IN C175-16 AND C175-20 ENGINES INSTALLED IN CERTAIN 793F, 795F, 797B, AND 797F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR CLEANING THE BEARING SURFACES OF THE CONNECTING ROD AND BEARING CAP FACES AND REPLACING THE CONNECTING ROD BEARINGS IN C175-16 AND C175-20 ENGINES INSTALLED IN CERTAIN 793F, 795F, 797B, AND 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC LEVEL SENSOR ON CERTAIN 1190, 1190T, 1390, 2390, 2491, 511, 521, 522, 532, 541, 551, AND 552 TRACK FELLER BUNCHERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC LEVEL SENSOR ON CERTAIN 1190, 1190T, 1390, 2390, 2491, 511, 521, 522, 532, 541, 551, AND 552 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR FLASHING NEW ENGINE SOFTWARE ON CERTAIN 24M MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR FLASHING NEW ENGINE SOFTWARE ON CERTAIN 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 273-2321 RH SUPPORT AS. ON CERTAIN 777F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING THE 273-2321 RH SUPPORT AS. ON CERTAIN 777F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PROTECTIVE FILM ON CERTAIN NAVIGATOR II DISPLAYS WITH PART NUMBERS 239-9531, 239-9532, 236-2534, 291-2199 AND WITH SERIAL NUMBERS BEGINNING WITH E8, F8, G8, H8, J8, K8, L8, M8, OR A9 PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PROTECTIVE FILM ON CERTAIN NAVIGATOR II DISPLAYS WITH PART NUMBERS 239-9531, 239-9532, 236-2534, 291-2199 AND WITH SERIAL NUMBERS BEGINNING WITH E8, F8, G8, H8, J8, K8, L8, M8, OR A9
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING SPINDLE HOUSINGS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, VARIOUS CHECK VALVE ASSEMBLIES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REMOVING, IF NECESSARY, VARIOUS CHECK VALVE ASSEMBLIES FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPAIRING AND REPLACING THE BRAKE FRICTION DISCS AND SEPARATOR PLATES ON CERTAIN 160M AND 14M MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPAIRING AND REPLACING THE BRAKE FRICTION DISCS AND SEPARATOR PLATES ON CERTAIN 160M AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 278-0383 TUBE ASSEMBLY ON CERTAIN 777F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 278-0383 TUBE ASSEMBLY ON CERTAIN 777F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 188-4750 OIL PAN (COUPLER PAN) ON CERTAIN 797B OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 188-4750 OIL PAN (COUPLER PAN) ON CERTAIN 797B OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR TROUBLESHOOTING EXCESSIVE WATER IN THE TANDEM OIL ON CERTAIN 140M AND 160M MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR TROUBLESHOOTING EXCESSIVE WATER IN THE TANDEM OIL ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC FAN MOTOR ON CERTAIN 725, 730, 735, 740, 730 EJECTOR, 740 EJECTOR, AND OEM VERSIONS OF ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HYDRAULIC FAN MOTOR ON CERTAIN 725, 730, 735, 740, 730 EJECTOR, 740 EJECTOR, AND OEM VERSIONS OF ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORKING THE FRONT GEAR TRAIN ON C175-16 AND C175-20 ENGINES INSTALLED IN CERTAIN 793F AND 797F OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING/REWORKING THE FRONT GEAR TRAIN ON C175-16 AND C175-20 ENGINES INSTALLED IN CERTAIN 793F AND 797F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION OF THE ENGINE OIL SCAVENGE PUMP MOUNTING BOLTS ON CERTAIN 797F OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION OF THE ENGINE OIL SCAVENGE PUMP MOUNTING BOLTS ON CERTAIN 797F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 140M MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGERS ON CERTAIN 140M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN 160M MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER ON CERTAIN 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RECEPTACLE - GP AUXILIARY START ON CERTAIN R2900G LOAD HAUL DUMP MACHINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE RECEPTACLE - GP AUXILIARY START ON CERTAIN R2900G LOAD HAUL DUMP MACHINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 266-4606 HOSE AS. AND/OR THE 6V-1889 CLIP ON CERTAIN 777F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 266-4606 HOSE AS. AND/OR THE 6V-1889 CLIP ON CERTAIN 777F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION FILTER BYPASS SPRINGS ON CERTAIN 120M, 12M, 140M, 14M, 160M AND 16M MOTOR GRADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION FILTER BYPASS SPRINGS ON CERTAIN 120M, 12M, 140M, 14M, 160M AND 16M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONTROL SOFTWARE ON CERTAIN 216B3, 226B3, 236B3, 242B3, AND 252B3 SKID STEER LOADERS; 247B3 AND 257B3 MULTI-TERRAIN LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONTROL SOFTWARE ON CERTAIN 216B3, 226B3, 236B3, 242B3, AND 252B3 SKID STEER LOADERS; 247B3 AND 257B3 MULTI-TERRAIN LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 140M AND 160M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 14M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 14M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 16M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 16M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 24M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW SOFTWARE AND CERTAIN HARDWARE COMPONENTS ON CERTAIN 24M MOTOR GRADERS