PRODUCT SUPPORT PROGRAM FOR REPLACING THE 299-5672 FUEL LEVEL SENDER ON CERTAIN C32 PM1000 UNITS
Usage:
REBE3736-00
Show/hide table
| 20May2008 |
U-274
Show/hide table
| Before/After | PRODUCT SUPPORT PROGRAM FOR REPLACING THE 2995672/">299-5672 FUEL LEVEL SENDER ON CERTAIN C32 PM1000 UNITS |
|
| 7483 7422 | PS42704 |
|
Show/hide table
| NOTE: | This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42704" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
TERMINATION DATE |
| 31May2010 |
PROBLEM
Show/hide table
| The existing fuel level sender can fail on certain C32 PM1000 units due to water entry shorting the circuit board. If the existing fuel level sender fails it will cause the unit to shut down, due to low fuel level indication. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| PMC32 | MED00100-00125 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 2995672 | SENSOR GP |
| In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 9% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer. | ||
ACTION REQUIRED
Show/hide table
| Replace the fuel level sender on the Affected Products. Refer to Appropriate Service Manual as necessary. Disassembly Procedure: 1. Remove discharge grate mounting hardware. 2. Remove discharge grate. 3. Disconnect fuel level sender electrical connection. 4. Remove fuel level sender. Assembly Procedure: 1. Install new fuel level sender. 2. Connect fuel level sender electrical connection. 3. Install discharge grate. 4. Install discharge grate mounting hardware. |
Show/hide table
SERVICE CLAIM ALLOWANCES
Show/hide table
0-100 mo |
||||||
Show/hide table
| NOTE: This is a 2.0-hour job | ||||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGER HOUSINGS AND ASSOCIATED HARDWARE ON CERTAIN 3512B LOCOMOTIVE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBOCHARGER HOUSINGS AND ASSOCIATED HARDWARE ON CERTAIN 3512B LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3756 CYLINDER PACKS AND 0R-1076 CONNECTING RODS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 0R-3756 CYLINDER PACKS AND 0R-1076 CONNECTING RODS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE GOVERNOR ACTUATOR ON CERTAIN 3508, 3512, AND 3516 MECHANICAL ENGINES BEING USED IN GENERATOR SET AND PETROLEUM APPLICATIONS PRODUCT IMPROVEMENT PROGRAM TO INSPECT AND POSSIBLY REPLACE THE GOVERNOR ACTUATOR ON CERTAIN 3508, 3512, AND 3516 MECHANICAL ENGINES BEING USED IN GENERATOR SET AND PETROLEUM APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 264-0349 PANEL ASSEMBLY ON CERTAIN C9 UNITS EQUIPPED WITH WEATHER PROOF ENCLOSURES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 264-0349 PANEL ASSEMBLY ON CERTAIN C9 UNITS EQUIPPED WITH WEATHER PROOF ENCLOSURES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BYPASS INDICATOR AND INSTALLING NEW SOFTWARE ON CERTAIN TH48-E80 TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BYPASS INDICATOR AND INSTALLING NEW SOFTWARE ON CERTAIN TH48-E80 TRANSMISSIONS
PRODUCT IMPROVEMENT PROGRAM FOR RERATING CERTAIN C7 AND C9 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RERATING CERTAIN C7 AND C9 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING BEARINGS ON CERTAIN TH48-E80 TRANSMISSIONS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING BEARINGS ON CERTAIN TH48-E80 TRANSMISSIONS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 1W-0098 CONNECTING ROD BOLTS ON CERTAIN 3606, 3608, 3612, 3616, AND C280-08 ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING THE 1W-0098 CONNECTING ROD BOLTS ON CERTAIN 3606, 3608, 3612, 3616, AND C280-08 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING EXHAUST COMBUSTION GROUPS INCLUDING EXTENSION PIPES ON CERTAIN C15 ON-HIGHWAY TRUCK ENGINES INSTALLED IN FREIGHTLINER CHASSIS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING EXHAUST COMBUSTION GROUPS INCLUDING EXTENSION PIPES ON CERTAIN C15 ON-HIGHWAY TRUCK ENGINES INSTALLED IN FREIGHTLINER CHASSIS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING A DAMAGED COOLANT LEVEL SENSOR ON CERTAIN 3126B, C7, C9, AND C12 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY REPLACING A DAMAGED COOLANT LEVEL SENSOR ON CERTAIN 3126B, C7, C9, AND C12 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE PRODUCT SUPPORT PROGRAM FOR UPDATING PRODUCT LINK SOFTWARE
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN C9 ON-HIGHWAY MASS TRANSIT BUS ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI PUMP ON CERTAIN C9 ON-HIGHWAY MASS TRANSIT BUS ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REVERSE FAN MOTOR ON CERTAIN TH220B AND TH330B TELEHANDLERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE REVERSE FAN MOTOR ON CERTAIN TH220B AND TH330B TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C7 ENGINES INSTALLED IN GENERAL MOTORS CHASSIS PRODUCT SUPPORT PROGRAM FOR INSTALLING SOFTWARE ON CERTAIN C7 ENGINES INSTALLED IN GENERAL MOTORS CHASSIS
PRODUCT SUPPORT PROGRAM FOR REPLACING OUTER VALVE SPRINGS ON CERTAIN C-12 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING OUTER VALVE SPRINGS ON CERTAIN C-12 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING 155-8538 EXHAUST ELBOW ON CERTAIN C9, C11, AND C13 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REWORKING 155-8538 EXHAUST ELBOW ON CERTAIN C9, C11, AND C13 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION TO ENSURE THAT FACTORY COOLING WATER HAS BEEN FULLY DRAINED FROM REMAN 3412 AND 3408 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION TO ENSURE THAT FACTORY COOLING WATER HAS BEEN FULLY DRAINED FROM REMAN 3412 AND 3408 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C7 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C9 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN C9 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR CHECKING THE 5S-7379 BOLTS OR THE 8T-2502 BOLTS ON THE HEAT SHIELD FOR CERTAIN C15 AND C18 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR CHECKING THE 5S-7379 BOLTS OR THE 8T-2502 BOLTS ON THE HEAT SHIELD FOR CERTAIN C15 AND C18 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER HEADS ON G3520C LANDFILL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER HEADS ON G3520C LANDFILL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 238-4665 TAPERLOCK STUD ON CERTAIN C15 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE 238-4665 TAPERLOCK STUD ON CERTAIN C15 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN DEFENSE AND FEDERAL PRODUCTS ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FUEL INJECTORS ON CERTAIN DEFENSE AND FEDERAL PRODUCTS ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON CERTAIN C15 COMMERCIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON CERTAIN C15 COMMERCIAL ENGINES