PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES.
Usage:
REBE1094-00
Show/hide table
| 16Aug2006 |
U-593
A-577
D-567
O-577
Show/hide table
| Priority | PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN C32 EPG ENGINES. |
|
| 7620 | PI31134 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI31134" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31134" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| 28Feb2007 | 31Aug2007 |
PROBLEM
Show/hide table
| The existing ECM can store engine hours improperly on certain C32 EPG engines. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C32 | SXC00300-00381, 385-425, 428-429, 431, 433, 440, 443-444, 446-469, 472, 482-489, 494-495, 497 |
PARTS NEEDED
Show/hide table
| No parts needed for this program |
ACTION REQUIRED
Show/hide table
| The ECM must be reflashed with the correct software to resolve this issue. The software needed varies by general arrangement. Following are the new software part numbers: 291-8571, 287-8177, 291-8572, 291-8573. Download the appropriate software from the Caterpillar SISWeb site. See the attached Rework Procedure for the correct software for each general arrangement. |
Show/hide table
OWNER NOTIFICATION
Show/hide table
| U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 0.5-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW ECM SOFTWARE ON CERTAIN ENGINES. MODELS INVOLVED - C32 EPG ENGINES Dear Caterpillar Product Owner: New ECM software needs to be installed on the products listed below. The existing ECM can store engine hours improperly. You will not be charged for the service performed. Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 16Aug2006 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 16Aug2006 Service Letter |
Show/hide table
| Step 1: Download appropriate flash file from SISWeb. Go to SISWeb site and select "Service Software Files". Step 2: Select "Flash Files". Step 3: Enter the "Flash Filename" in the search box and select "Search". The "Flash Filename" needed depends on the general arrangement part number of the engine. The "Flash Filenames" available are listed below: General Arrangement P/N: 253-7904 --> Flash Filename: 2918571 General Arrangement P/N: 274-1893 --> Flash Filename: 2918572 General Arrangement P/N: 274-1894 --> Flash Filename: 2918573 General Arrangement P/N: 274-1895 --> Flash Filename: 2918573 General Arrangement P/N: 280-4255 --> Flash Filename: 2918572 General Arrangement P/N: 281-6044 --> Flash Filename: 2878177 Step 4: Reflash ECM with appropriate flash file. |
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES. PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN 3512B ENGINES EQUIPPED WITH ADEM 3 ENGINE CONTROL MODULES.
PRODUCT SUPPORT PROGRAM FOR CHANGING FLS AND FTS SETTINGS ON CERTAIN 3412E, C30, AND C32 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR CHANGING FLS AND FTS SETTINGS ON CERTAIN 3412E, C30, AND C32 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE WATER TEMPERATURE REGULATOR ON CERTAIN C9 ON-HIGHWAY TRUCK ENGINES
Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines
Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines. Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines.
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508B GENERATOR SET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508B GENERATOR SET ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE SOFTWARE (FLASH FILE) ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE SOFTWARE (FLASH FILE) ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BRAIDED POWER CABLES ON CERTAIN C18 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BRAIDED POWER CABLES ON CERTAIN C18 GENERATOR SETS
Product Improvment Program for replacing the braided power cabling on certain C18 Generartor Sets Product Improvment Program for replacing the braided power cabling on certain C18 Generartor Sets
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING ENGINE SOFTWARE FOR CERTAIN C15 TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING ENGINE SOFTWARE FOR CERTAIN C15 TRUCK ENGINES
PRODUCT IMPROVMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN DV-3126E TRUCK ENGINES PRODUCT IMPROVMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN DV-3126E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE HEUI OIL PRESSURE SENSOR AND HEUI OIL CROSSOVER TUBES ON CERTAIN 3126A REMANUFACTURED ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET PRODUCT SUPPORT PROGRAM FOR REPLACING THE FAN DRIVE BELTS ON CERTAIN C32 50HZ GENERATOR SET
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DIRECT INJECTION FUEL NOZZLE ADAPTERS ON CERTAIN 3408 AND 3412 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE LUBE OIL PUMP ON CERTAIN C6.6 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS FOR CERTAIN C32 AND 3500 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING P-FRAME CIRCUIT BREAKER SUPPORTS ON CERTAIN C32 AND 3508 GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS PRODUCT SUPPORT PROGRAM FOR INSTALLING WIRING HARNESSES FOR CERTAIN C32 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTIAN 0R7467 CYLINDER HEADS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING DRIVELINE ON CERTAIN C-18 GENERATOR SETS WITH LC6 GENERATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING FUEL LINES ON CERTAIN 3516B HD LOCOMOTIVE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3512B PETROLEUM GENSET ENGINES.
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING SOFTWARE ON CERTAIN C9 ACERT MARINE ENGINES