PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TRANSMISSION PRESSURE SENSOR ON CERTAIN C9 ACERT MARINE ENGINES
Usage:
REBE1032-00
Show/hide table
| 20Jul2006 |
U-564
A-549
D-545
O-545
TM-502
Show/hide table
| Priority | PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TRANSMISSION PRESSURE SENSOR ON CERTAIN C9 ACERT MARINE ENGINES |
|
| 7482 | PI31019 |
|
Show/hide table
| NOTE: | This Program must be administered as soon as possible. When reporting the repair, use "PI31019" as the Part Number and "7751" as the Group Number, "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. Exception: If the repair is done after failure, use "PI31019" as the Part Number, "7751" as the Group Number, "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code. |
Show/hide table
| NOTE: | The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst. |
Show/hide table
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| 31Jan2007 | 31Jul2007 |
PROBLEM
Show/hide table
| An incorrect transmission pressure sensor may have been installed on certain C9 Acert Marine Engines. The transmission pressure sensor may provide an inaccurate indication of transmission pressure. |
AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| C9 | X9X00212-00217, 256-265, 268-269, 274-283, 286-289, 292-296, 327-333, 338-341, 358-362, 385-392, 394-397, 405-408, 411-441, 443-458, 460-467, 469-472, 475-514 |
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 | 1638512 | SENSOR GP-PRESS |
ACTION REQUIRED
Show/hide table
| Replace the 161-9932 Sensor Gp (Pressure) with a 163-8512 Sensor Gp. (Pressure) and remove the extension harness between the engine wiring harness and the sensor (if equipped). |
Show/hide table
OWNER NOTIFICATION
Show/hide table
| U.S. and Canadian owners will receive the attached Owner Notification. |
SERVICE CLAIM ALLOWANCES
Show/hide table
Show/hide table
| NOTE: This is a 0.5-hour job | |||||
Show/hide table
PARTS DISPOSITION
Show/hide table
| Handle the parts in accordance with your Warranty Bulletin on warranty parts handling. |
| MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE. |
Show/hide table
| COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS XYZ Corporation 3240 Arrow Drive Anywhere, YZ 99999 PRIORITY - PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE TRANSMISSION PRESSURE SENSOR MODELS INVOLVED - CERTAIN C9 ACERT MARINE ENGINES Dear Caterpillar Product Owner: A new transmission pressure sensor needs to be installed on your C9 Marine engine. Failure to update your engine may result in an inaccurate indication of transmission pressure. You will not be charged for the service performed. Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated 20Jul2006 when scheduling this service. We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime. Caterpillar Inc. Identification #(s) Attached to 20Jul2006 Service Letter |
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR REPLACING TURBO EXHAUST HOUSINGS FOR CERTAIN C12 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING TURBO EXHAUST HOUSINGS FOR CERTAIN C12 MARINE ENGINES
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
3192 MARINE GEAR Planetary Reduction Gears
3192 MARINE GEAR Idler Shaft and Lower Shaft
3192 MARINE GEAR Ahead and Astern Clutches and Clutch Shafts
3192 MARINE GEAR Lubrication Components
3192 MARINE GEAR Lubrication, Hydraulic System and Operation
3192 MARINE GEAR Introduction and Application
3192 MARINE GEAR Cutaway
3192 MARINE GEAR Specifications
UPDATES/ADDITIONS TO CATERPILLAR® CLASSIC UNDERCARRIAGE PARTS UPDATES/ADDITIONS TO CATERPILLAR® CLASSIC UNDERCARRIAGE PARTS
Gasket and Seal Kits Available For Drive Train Components Gasket and Seal Kits Available For Drive Train Components
Product Improvement program for Removing all 242-3958 voltage regulators from dealer part stock. Product Improvement program for Removing all 242-3958 voltage regulators from dealer part stock.
Product support program to replace generator voltage regulators producing no voltage, that are subject to high humidity on 3406C, 3456, and C18 Generator Sets. Product support program to replace generator voltage regulators producing no voltage, that are subject to high humidity on 3406C, 3456, and C18 Generator Sets.
PRODUCT SUPPORT PROGRAM FOR INSPECTING THE AIR AND FUEL ACTUATORS ON CERTAIN G3516 ENGINES PRODUCT SUPPORT PROGRAM FOR INSPECTING THE AIR AND FUEL ACTUATORS ON CERTAIN G3516 ENGINES
PRODUCT IMPROVMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN DV-3126E TRUCK ENGINES PRODUCT IMPROVMENT PROGRAM FOR REFLASHING ENGINE SOFTWARE ON CERTAIN DV-3126E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING ENGINE SOFTWARE FOR CERTAIN C15 TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING ENGINE SOFTWARE FOR CERTAIN C15 TRUCK ENGINES
Product Improvment Program for replacing the braided power cabling on certain C18 Generartor Sets Product Improvment Program for replacing the braided power cabling on certain C18 Generartor Sets
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BRAIDED POWER CABLES ON CERTAIN C18 GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE BRAIDED POWER CABLES ON CERTAIN C18 GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE SOFTWARE (FLASH FILE) ON CERTAIN C9 ACERT MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR RE-FLASHING THE SOFTWARE (FLASH FILE) ON CERTAIN C9 ACERT MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508B GENERATOR SET ENGINES. PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE 193-3288 DAMPER GROUP ON CERTAIN 3508B GENERATOR SET ENGINES.
Product support program for updating software on all machines equipped with PL121s and PL321s Product Link Product support program for updating software on all machines equipped with PL121s and PL321s Product Link
Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines. Product Improvement Program to relocate limit switches and add vibration dampers to the Air Shut Offs(ASOs) on certain 3500 diesel engines.
Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines Product Improvement Program for adding vibration dampers to Air Shut Offs on certain 3500 diesel engines