Check the Filter Base of the Hydraulic Tank on Certain Load Haul Dump Machines {5056} Caterpillar


Check the Filter Base of the Hydraulic Tank on Certain Load Haul Dump Machines {5056}

Usage:

R1700G 8XZ
Load Haul Dump
R1600G (S/N: 9PP1-UP; 9YZ1-UP)
R1600H (S/N: 9SD1-UP)
R1700G (S/N: SBR1-UP; XBR1-UP; 8XZ1-UP)
R2900G (S/N: GLK1-UP; JLK1-UP; NLK1-UP)
R3000H (S/N: RCM1-UP; RCY1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem



Illustration 1g06423224
View of 230-9789 Hydraulic Tank Gp
(1) Stud
(2) Filter Base

An alternative filter base (2), with alternative studs (1), may be installed to the 230-9789 Hydraulic Tank Gp on certain machines. Machines within the above serial number ranges, may have the alternative parts installed.

The alternate studs cannot be used with the original filter base. The original studs cannot be used with the alternate filter base.

Solution

Caterpillar is aware of this problem. In the event of failure of the filter base (2), or of a filter stud (1), identify the filter base prior to repair. Refer to Illustration 2 and Illustration 3.



Illustration 2g06423244
Alternative Filter Base (Machined)


Illustration 3g06423243
3G-2725 Filter Base (Primary cast version)

  • If the failed filter base is 3G-2725, replace with the same 3G-2725 Filter Base

  • If the failed stud is assembled to filter base 3G-2725, replace with same 3G-2815 Stud

  • If the failed filter base is the ‘Alternate Filter Base (Machined)’, remove and discard both the filter base and the stud. Replace with 3G-2725 Filter Base and two 3G-2815 Studs

  • If the failed stud is assembled to ‘Alternate Filter Base (Machined)’, remove and discard both the Filter Base and the Stud. Replace with 3G-2725 Filter Base and two 3G-2815 Studs

Table 1
230-9789 Hydraulic Tank Gp ( Primary Part Details) 
Part Number  Part Description 
3G-2725  Filter Base 
3G-2815  Stud 

------ WARNING! ------

Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility.


Caterpillar Information System:

An Improved Field Installation of the Seat Belt Group on Certain Utility Asphalt Compactors {7327} An Improved Field Installation of the Seat Belt Group on Certain Utility Asphalt Compactors {7327}
C3.3B and C3.8 Engines for Caterpillar Built Machines Diesel Particulate Filter Error
PM310, PM312 and PM313 Cold Planer Machine Systems Rotor
PM310, PM312 and PM313 Cold Planer Machine Systems Return Lines
PM310, PM312 and PM313 Cold Planer Machine Systems Return Lines
PM310, PM312 and PM313 Cold Planer Machine Systems Gerotor Motor and Mounting
PM310, PM312 and PM313 Cold Planer Machine Systems Clutch
PM310, PM312 and PM313 Cold Planer Power Train Propel Lines
PM310, PM312 and PM313 Cold Planer Machine Systems Lines (Lift Cylinder)
Medium Wheel Loader and Work Tool Combination ISO5006:2017 Conformance List {6001, 6405, 6700, 7000} Medium Wheel Loader and Work Tool Combination ISO5006:2017 Conformance List {6001, 6405, 6700, 7000}
PM310, PM312 and PM313 Cold Planer Machine Systems Lines (Lift Cylinder)
PM310, PM312 and PM313 Cold Planer Machine Systems Lines (Conveyor)
Check the Torque Converter Suction Screen on R1700 Load Haul Dump Machines {3016, 3101, 3154} Check the Torque Converter Suction Screen on R1700 Load Haul Dump Machines {3016, 3101, 3154}
PM310, PM312 and PM313 Cold Planer Machine Systems Pump Lines
PM310, PM312 and PM313 Cold Planer Power Train Propel Lines
B1, B2, B4, B6 and B8 Hydraulic Hammers Decommissioning and Disposal
The Stabilizer Cylinder May Drift on Certain 450E/F Backhoe Loaders {5468} The Stabilizer Cylinder May Drift on Certain 450E/F Backhoe Loaders {5468}
Weld Modification on Shaft Assembly for Autoshift Transmission is Now Used on Certain Backhoe Loaders {3053, 3063} Weld Modification on Shaft Assembly for Autoshift Transmission is Now Used on Certain Backhoe Loaders {3053, 3063}
A New Cylinder Head is Now Used for Certain C175 Off-Highway Truck Engines {1100} A New Cylinder Head is Now Used for Certain C175 Off-Highway Truck Engines {1100}
Certain Reman Fuel Injectors Have a New Nozzle Body Finishing Process {1254} Certain Reman Fuel Injectors Have a New Nozzle Body Finishing Process {1254}
New Software is Now Used on Certain C9.3 Machine Engines {1920} New Software is Now Used on Certain C9.3 Machine Engines {1920}
Improved Final Drive Carrier Sealing Now Used on R2900G and R3000H Load Haul Dump Machines {4092} Improved Final Drive Carrier Sealing Now Used on R2900G and R3000H Load Haul Dump Machines {4092}
Swing Bearing and Gear Backlash May Not be Properly Adjusted on Certain D-Series Knuckleboom Loaders {5459} Swing Bearing and Gear Backlash May Not be Properly Adjusted on Certain D-Series Knuckleboom Loaders {5459}
794 AC Off-Highway Truck Systems Position Sensor (Truck Body) - Calibrate
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.