An Improved Top Plate Protecting Cab Roof Is Available for Certain 973D and 973K Steel Mill Machines {7301}
- Track-Type Loader
- 973D (S/N: LCP1-78001)
- 973K (S/N: MKL1-344)
Description Of Change: An improved top plate protecting the cab roof is available.
Adaptable To:
Show/hide table
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Show/hide table
Illustration 1 | g06415856 |
Current plate |
Show/hide table
Illustration 2 | g06415859 |
Improved plate |
Caterpillar Information System:
340 Excavator Mirror
C13B Engines Pistons and Connecting Rods - Install
C13B Engines Pistons and Connecting Rods - Remove
395 Excavator Equipment Lowering with Engine Stopped
395 Excavator Engine and Machine Warm-Up
395 Excavator Fuel Tank Shutoff and Drain Control
Fenders May Crack on Certain Telehandlers {7252} Fenders May Crack on Certain Telehandlers {7252}
395 Excavator Mirror
MD6250 Rotary Drill Systems HVAC System
395 Excavator Fuel Transfer Pump (Refueling) - If Equipped
Quick Coupler Harness Receptacle May Pinned Wrong and Quick Coupler Switch May Malfunction on Certain 986K Wheel Loaders {1408} Quick Coupler Harness Receptacle May Pinned Wrong and Quick Coupler Switch May Malfunction on Certain 986K Wheel Loaders {1408}
D11 Track-Type Tractor Systems Antenna
C13B Engines Pistons and Connecting Rods - Disassemble
C13B Engines Pistons and Connecting Rods - Assemble
395 Excavator Stopping the Engine
Procedure to Rework 11m Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 11m Mast Encoder on Certain MD6250 Rotary Drills {1408}
Procedure to Rework 13.6 m (44.62 ft) Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 13.6 m (44.62 ft) Mast Encoder on Certain MD6250 Rotary Drills {1408}
Procedure to Rework 13.6 m (44.62 ft) Coalspur Mast Encoder on Certain MD6250 Rotary Drills {1408} Procedure to Rework 13.6 m (44.62 ft) Coalspur Mast Encoder on Certain MD6250 Rotary Drills {1408}
Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562} Deck Wrench Cylinder Duty Cycle May Not Be Within Specification on Certain MD6200, MD6250, and MD6310 Rotary Drills {7562}
D11 Track-Type Tractor Systems Piston Pump (Hydraulic Fan)
D11 Track-Type Tractor Systems Cab Mounting
D11 Track-Type Tractor Systems Air Conditioner Lines
395 Excavator Counterweight Removal and Installation
340 Excavators Machine Systems Stick - Remove