New Cat® Object Detect Software (Monitor Software) Version is Now Available for Certain Applications on Certain Machines {7610, 7620} Caterpillar

Wheel Dozer

834K (S/N: L4Y1-UP; LWY1-UP; TWY1-UP)

844K (S/N: M4R1-UP; KLS1-UP)

854K (S/N: KK31-UP; RM31-UP; KK61-UP; RM61-UP)

Wheel Loader

988K (S/N: T8E1-UP; L8X1-UP; LWX1-UP; TWX1-UP)

988K XE (S/N: E8X1-UP)

990K (S/N: DJK1-UP; A9P1-UP; M9P1-UP; K9X1-UP)

992K (S/N: KK21-UP; RM21-UP; KK41-UP; RM51-UP)

994K (S/N: MM91-UP; MRK1-UP; SMX1-UP)

New Cat^® Object Detect software version 4.3.6 is now available for certain applications on the machines listed above. The new software version will allow the software to flash properly with correct part number, either wired or remote flash.

Flash Object Detect software version 4.3.6 is available for the following applications:

• Large Mining Trucks and Off-Highway Trucks

• Radar standard

• Vision rear

• Vision truck

• Rear Radar Small

The new and former software part numbers are listed in Table 1.

Note: The new software is available in the form of a flash file through the Caterpillar Service Information System (SIS). A newer part number may be available. SIS web only displays the latest available flash file.

The new software is adaptable to the products within the listed serial numbers.