A New Torque is Now Used on the Diesel Exhaust Fluid (DEF) Nozzle on Certain 3500, C175, C280, and C32 Engines {108I}
- Engine
- 3512E (S/N: MR21-208; MR41-205; MR81-208)
- 3516C (S/N: LY61-119; PRC1-103)
- 3516E (S/N: MD51-201; MR91-213; MRC1-246; MRN1-203)
- C175-16 (S/N: 3B91-113)
- C175-20 (S/N: R4F1-141)
- C280-16 (S/N: A4F1-115; R4M1-111; S4M1-107)
- 3516C (S/N: LY61-119; PRC1-103)
- Marine Engine
- C280-12 (S/N: RH71-104; RML1-107)
- C32 MARINE (S/N: MX41-104; PWT1-108)
Description Of Change: The new torque used between the DEF nozzle and lance assembly helps prevent a DEF leakage.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Tighten the 375-7205 Diesel Exhaust Fluid Nozzle Gp to a torque of
Caterpillar Information System:
120 Motor Graders Transmission Control Valve
120 Motor Graders Transmission Oil Lines
120 Motor Graders Valve Mounting
120 Motor Graders Front Axle (All Wheel Drive)
120 Motor Graders Front Frame
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555} A New Oil Pan Gasket is Now Used for Certain C15 and C18 Machine Engines {1302, 7555}
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Remove and Install
The Engine Electronic Control Module May Become Unresponsive After Resets or Voltage Drops on Certain C9.3B Engines {1901} The Engine Electronic Control Module May Become Unresponsive After Resets or Voltage Drops on Certain C9.3B Engines {1901}
140 Motor Grader Power Train Piston Motor (Wheel Propel) - Assemble
140 Motor Grader Power Train Piston Motor (Wheel Propel) - Disassemble
The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701} The Outside Diameter Maybe Incorrect on the 563-9214 Crankshaft Seal Installation Gp Used for Certain Engines {0701}
C18 Generator Set Belts - Inspect/Adjust/Replace
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553} New Solenoid Assembly is Now Used on Certain C7, C9, and C9.3 Machine Engine Fuel Injectors {1250, 7553}
C18 Generator Set Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
G3500J Engines Overhaul (Major)
313 and 313 GC Excavator Monitoring System
120 Motor Graders Transmission Hydraulic Control
120 Motor Graders Accumulator Charging Valve
120 Motor Graders Air Conditioner Lines
120 Motor Graders Control Manifold (Implement, Steering)
320 GC, 320 and 323 Excavator Machine Systems Specifications Pilot Lines
120 Motor Graders Control Valve (Ripper)