Cat® Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620} Caterpillar


Cat® Object Detection Software Update Is Now Available for Certain Soil Compactors, Wheel Dozers, and Wheel Loaders {1439, 7347, 7348, 7490, 7610, 7620}

Usage:

854K 221
Soil Compactor
815K (S/N: SL91-UP; MBB1-UP; WCS1-UP; T1Y1-UP)
825K (S/N: 2331-UP; 2L91-UP; 2T91-UP; SEE1-UP)
Wheel Dozer
814K (S/N: DMB1-UP; WCM1-UP; T1Z1-UP)
824K (S/N: 2T21-UP; 2L41-UP; 2341-UP; RWB1-UP)
834K (S/N: TW41-UP; TWY1-UP)
844K (S/N: MBE1-UP; M4R1-UP; KLS1-UP; K4Y1-UP)
854K (S/N: 2211-UP; KK31-UP; RM31-UP; KK61-UP; RM61-UP; H9K1-UP; H8M1-UP)
Wheel Loader
986K (S/N: MH81-UP; NL81-UP; SWH1-UP)
988K (S/N: T8E1-UP; L8X1-UP; LWX1-UP; TWX1-UP)
988K XE (S/N: E8X1-UP; EWX1-UP)
990K (S/N: DJK1-UP; A9P1-UP; M9P1-UP; K9X1-UP)
992K (S/N: 8801-UP; KK21-UP; RM21-UP; KK41-UP; RM51-UP; H4C1-UP; ZMX1-UP)
993K (S/N: Z4D1-UP; Z8D1-UP; Z9K1-UP; Z4Z1-UP; Z8Z1-UP)
994H (S/N: DWC1-UP)
994K (S/N: MM91-UP; MRK1-UP; SMX1-UP)

Cat® Object Detection software update is now available for the products listed above.

567-4711 Monitor Software Gp is backwards compatible with C5 radars performed with a radar system Cat® Electronic Technician (Cat ET) service tool configuration. Cat ET parameter setting is required when the software is updated.

Table 1
Supported Radar Configuration in Cat ET  Part Number  Radar Type  Sets of Radar  Effective Serial Number Prefix  Display Name on System Info Screen  Default Status of Radar Configuration in Cat ET 
464-7684 Object Detection Sensor Gp  C5  Single  For 814K (1) machines : S/N:DMB1-UP ; S/N:WCM1-UP ; S/N:T1Z1-UP
For 815K machines : S/N:SL91-UP ; S/N:MBB1-UP ; S/N:WCS1-UP ; S/N:T1Y1-UP
For 824K (1) machines : S/N:2T21-UP ; S/N:2L41-UP ; S/N:2341-UP ; S/N:RWB1-UP
For 825K machines : S/N:2331-UP ; S/N:2L91-UP ; S/N:2T91-UP ; S/N:SEE1-UP
For 834K machines : S/N:TW41-UP ; S/N:TWY1-UP
For 854K machines : S/N:2211-UP ; S/N:KK31-UP ; S/N:RM31-UP ; S/N:KK61-UP ; S/N:RM61-UP ; S/N:H9K1-UP ; S/N:H8M1-UP
For 986K machines : S/N:MH81-UP ; S/N:NL81-UP ; S/N:SWH1-UP
For 988K machines : S/N:T8E1-UP ; S/N:L8X1 ; S/N:LWX1-UP ; S/N:TWX1-UP
For 988K XE machines : S/N:E8X1-UP ; S/N:EWX1-UP
For 992K machines : S/N:8801-UP ; S/N:KK21-UP ; S/N:RM21-UP ; S/N:KK41-UP ; S/N:RM51-UP ; S/N:H4C1-UP ; S/N:ZMX1-UP
For 993K machines : S/N:Z4D1-UP ; S/N:Z8D1-UP ; S/N:Z9K1-UP ; S/N:Z4Z1-UP ; S/N:Z8Z1-UP 
Gen III 
397-2994 Object Detection Sensor Gp  C6  Two  For 814K (1) machines : S/N:DMB1-UP ; S/N:WCM1-UP ; S/N:T1Z1-UP
For 815K machines : S/N:SL91-UP ; S/N:MBB1-UP ; S/N:WCS1-UP ; S/N:T1Y1-UP
For 834K machines : S/N:TW41-UP ; S/N:TWY1-UP
For 844K machines : S/N:MBE1-UP ; S/N:M4R1-UP ; S/N:KLS1-UP ; S/N:K4Y1-UP
For 986K machines : S/N:MH81-UP ; S/N:NL81-UP ; S/N:SWH1-UP
For 988K machines : S/N:T8E1-UP ; S/N:L8X1 ; S/N:LWX1-UP ; S/N:TWX1-UP
For 988K XE machines : S/N:E8X1-UP ; S/N:EWX1-UP
For 990K machines : S/N:DJK1-UP ; S/N:A9P1-UP ; S/N:M9P1-UP ; S/N:K9X1-UP 
Gen IV 
30  365-1271 Object Detection Sensor Gp  C4  Three  For 834K machines : S/N:TW41-UP ; S/N:TWY1-UP
For 844K machines : S/N:MBE1-UP ; S/N:M4R1-UP ; S/N:KLS1-UP ; S/N:K4Y1-UP
For 854K machines : S/N:2211-UP ; S/N:KK31-UP ; S/N:RM31-UP ; S/N:KK61-UP ; S/N:RM61-UP ; S/N:H9K1-UP ; S/N:H8M1-UP
For 988K machines : S/N:T8E1-UP ; S/N:L8X1-UP ; S/N:LWX1-UP ; S/N:TWX1-UP
For 990K machines : S/N:DJK1-UP ; S/N:A9P1-UP ; S/N:M9P1-UP ; S/N:K9X1-UP
For 992K machines : S/N:8801-UP ; S/N:KK21-UP ; S/N:RM21-UP ; S/N:KK41-UP ; S/N:RM51-UP ; S/N:H4C1-UP ; S/N:ZMX1-UP
For 993K machines : S/N:Z4D1-UP ; S/N:Z8D1-UP ; S/N:Z9K1-UP ; S/N:Z4Z1-UP ; S/N:Z8Z1-UP
For 994H machines S/N:DWC1-UP or
For 994K machines S/N:MM91-UP ; S/N:MRK1-UP ; S/N:SMX1-UP 
Gen II  32 
31  464-7684 Object Detection Sensor Gp  C5  Three  For 814K (1) machines : S/N:DMB1-UP ; S/N:WCM1-UP ; S/N:T1Z1-UP
For 815K machines : S/N:SL91-UP ; S/N:MBB1-UP ; S/N:WCS1-UP ; S/N:T1Y1-UP
For 824K (1) machines : S/N:2T21-UP ; S/N:2L41-UP ; S/N:2341-UP ; S/N:RWB1-UP
For 825K machines : S/N:2331-UP ; S/N:2L91-UP ; S/N:2T91-UP ; S/N:SEE1-UP
For 834K machines : S/N:TW41 ; S/N:TWY1
For 854K machines : S/N:2211-UP ; S/N:KK31-UP ; S/N:RM31-UP ; S/N:KK61-UP ; S/N:RM61-UP ; S/N:H9K1-UP ; S/N:H8M1-UP
For 986K machines : S/N:MH81-UP ; S/N:NL81-UP ; S/N:SWH1-UP
For 988K machines : S/N:T8E1-UP ; S/N:L8X1-UP ; S/N:LWX1-UP ; S/N:TWX1-UP
For 988K XE machines : S/N:E8X1-UP ; S/N:EWX1-UP
For 992K machines : S/N:8801-UP ; S/N:KK21-UP ; S/N:RM21-UP ; S/N:KK41-UP ; S/N:RM51-UP ; S/N:H4C1-UP ; S/N:ZMX1-UP
For 993K machines : S/N:Z4D1-UP ; S/N:Z8D1-UP ; S/N:Z4Z1-UP ; S/N:Z8Z1-UP 
Gen III 
32  397-2994 Object Detection Sensor Gp  C6  Three  For 814K (1) machines : S/N:DMB1-UP ; S/N:WCM1-UP ; S/N:T1Z1-UP
For 988K machines : S/N:T8E1-UP ; S/N:L8X1-UP ; S/N:LWX1-UP ; S/N:TWX1-UP
For 988K XE machines : S/N:E8X1-UP ; S/N:EWX1-UP
For 990K machines : S/N:DJK1-UP ; S/N:A9P1-UP ; S/N:M9P1-UP ; S/N:K9X1-UP 
Gen IV 
(1) DETECT READY

For C5 radar, refer to Table 1 to set the configuration value in the latest flash file. Table 1 also provides more information on the configuration change for upgrades from C5 radar to C6 radar.

Note: The configuration will stay through re-flash if a radar generation was supported previously. These machines will lose the configuration if a wash is performed or a new display is flashed. Refer to Table 1 in this circumstance.

Note: For 854K, 992K, 993K, and 994K machines, the configuration will not stay through a re-flash and default to C6 radar when the 567-4711 Monitor Software Gp or a future flash file is flashed.

The following changes are now available for the products within the listed serial numbers.

When misconfigured, Cat ET will display the following errors, shown in Illustration 1.



Illustration 1g06363160

Using the following procedure will correct the errors listed in Illustration 1 and help update the radar value in Cat ET.



    Illustration 2g06363167

  1. From Cat ET, navigate to "Radar Systems".


    Illustration 3g06363168

  2. Select "Radar Systems".


    Illustration 4g06363169

  3. Type the supported radar configuration value, listed in the Column 1 of Table 1 that corresponds to the machine's radar into the "New Value" field. Select "OK".

Caterpillar Information System:

Installation of Aftermarket Seatbelt Alert kit on Caterpillar<SUB>&reg;</SUB> 773D and 777D Off-Highway Trucks {1408, 7327, 7400} Installation of Aftermarket Seatbelt Alert kit on Caterpillar<SUB>&reg;</SUB> 773D and 777D Off-Highway Trucks {1408, 7327, 7400}
The Slack Adjuster Group May Fail on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4261} The Slack Adjuster Group May Fail on Certain 770G, 772G, 773G, and 775G Off-Highway Trucks {4261}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Air Cleaner
An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108} An Improved Rear Pump drive Bolt Used on Certain 994K Wheel Loaders {3108}
Unable to View Snapshots in Cat&reg; Product Link Web {7606} Unable to View Snapshots in Cat&reg; Product Link Web {7606}
Certain Cat&reg; Product Link Device Equipment Data Is Not Updated and May Cause Subscription Issue {7606} Certain Cat&reg; Product Link Device Equipment Data Is Not Updated and May Cause Subscription Issue {7606}
Certain Cat&reg; Product Link (PL542) Devices Are Not Registering in Cat Connect Digital Services (CCDS) and Cannot Be Subscribed in Dealer Service Portal (DSP) {7606} Certain Cat&reg; Product Link (PL542) Devices Are Not Registering in Cat Connect Digital Services (CCDS) and Cannot Be Subscribed in Dealer Service Portal (DSP) {7606}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Hydraulic Cylinder
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
Special Instructions are Now Available for Retrofitting Hydraulic Hose Clamping on Certain Compact Track Loaders,Multi Terrain Loaders, and Skid Steer Loaders {5057} Special Instructions are Now Available for Retrofitting Hydraulic Hose Clamping on Certain Compact Track Loaders,Multi Terrain Loaders, and Skid Steer Loaders {5057}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154} Improved Transmission Hose Routing is Used on Certain 994K Wheel Loaders {3016, 3154}
New Orifices to Reduce the Speed of Hydraulic End-gates are Now Available for certain SE50VT and SE60VT XW Asphalt Screeds {5479} New Orifices to Reduce the Speed of Hydraulic End-gates are Now Available for certain SE50VT and SE60VT XW Asphalt Screeds {5479}
Rework Procedure for Heater Hold Down on Certain SE50 V Asphalt Screeds {1408} Rework Procedure for Heater Hold Down on Certain SE50 V Asphalt Screeds {1408}
Check the Window Glass for Correct Lubricant on Certain R1700 Load Haul Dump Machines {7310} Check the Window Glass for Correct Lubricant on Certain R1700 Load Haul Dump Machines {7310}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Operator Console
An Improved Transmission Clutch Housing Is Now Used on Certain 972L and 972M Medium Wheel Loaders {3160} An Improved Transmission Clutch Housing Is Now Used on Certain 972L and 972M Medium Wheel Loaders {3160}
New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620} New Monitor Software Is Now Available for Certain Track-Type Tractors and Various Products {7490, 7601, 7603, 7610, 7620}
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Water Spray Group - Lines
Exhaust Gas Valve (NRS) on Certain C7.1 and C6.6 Engines {1082} Exhaust Gas Valve (NRS) on Certain C7.1 and C6.6 Engines {1082}
24 Motor Graders Engine Supplement Water Separator and Fuel Filter (Primary) - Remove and Install
Steering Pin Puller and Tri-Link Support {0599, 0732, 4305} Steering Pin Puller and Tri-Link Support {0599, 0732, 4305}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.