A New Handheld Digital Manometer is Now Available {7490} Caterpillar


A New Handheld Digital Manometer is Now Available {7490}

Usage:

769C 01X
Caterpillar Products with Cabs
All

A new handheld digital manometer is now available for the machines listed above. The new manometer measures positive, negative, or differential pressures of air and natural gases. Ranges from 0" to 10" w.c., 2.491 kPa and maximum pressure of 34.47 kPa.

The dual push pads on the front panel control the ON/OFF, auto zero, and unit selection, allowing for simple operation with no setup needed.

Table 1
Required Tools 
Qty  Part Number  Part Name 
565-2521  Manometer 

Caterpillar Information System:

C7.1 Engines for Caterpillar Built Machines Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
S3015, S3025 and S3035 Demolition and Scrap Shears Mounting Bracket - Boom Mount - Flat Top
S3015, S3025 and S3035 Demolition and Scrap Shears Mounting Gp
New Power Train Software now Available for Certain R3000H Load Haul Dump Machines. {7620} New Power Train Software now Available for Certain R3000H Load Haul Dump Machines. {7620}
A Bracket Assembly in the Steering Lines Group is Improved on Certain 794 AC Off-Highway Trucks {4304} A Bracket Assembly in the Steering Lines Group is Improved on Certain 794 AC Off-Highway Trucks {4304}
Fire Extinguisher Is Now Available on Certain Telehandlers {7000} Fire Extinguisher Is Now Available on Certain Telehandlers {7000}
24 Motor Grader Machine Systems Bypass Valve (Hydraulic Oil Cooler) - Remove and Install
Installation Procedure for the Fire Extinguisher in the Cab Is Now Available on Certain Telehandlers {7301} Installation Procedure for the Fire Extinguisher in the Cab Is Now Available on Certain Telehandlers {7301}
Advanced Display on the Electronic Control Module Can Go Blank on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7490, 7494, 7601, 7603, 7610, 7620} Advanced Display on the Electronic Control Module Can Go Blank on Certain Compact Track Loaders, Multi Terrain Loaders, and Skid Steer Loaders {7490, 7494, 7601, 7603, 7610, 7620}
An Improved Bulk Hose in the Return Lines Group Is Now Used On Certain 424B Backhoe Loaders {5057} An Improved Bulk Hose in the Return Lines Group Is Now Used On Certain 424B Backhoe Loaders {5057}
795F AC and 795F AC XQ Off-Highway Trucks Operation Information - Trolley System (If Equipped)
24 Motor Grader Machine Systems Gerotor Motor (Circle Drive) - Remove and Install
PM620 and PM622 Cold Planer Machine Storage
24 Motor Grader Machine Systems Fan and Piston Motor (Hydraulic Fan) - Remove and Install
Improved Software Groups Are Now Used On Certain 740 EJ and 745 Articulated Trucks {1901, 4800, 4801, 7490, 7600, 7610, 7620} Improved Software Groups Are Now Used On Certain 740 EJ and 745 Articulated Trucks {1901, 4800, 4801, 7490, 7600, 7610, 7620}
New Optional 3 Inch Wide Seat Belt Is Now Available for Certain Telehandlers {7327} New Optional 3 Inch Wide Seat Belt Is Now Available for Certain Telehandlers {7327}
24 Motor Grader Power Train Final Drive - Disassemble
24 Motor Grader Power Train Final Drive - Assemble
C175 Tier 4 Final Engines for Caterpillar Built Machines Electronic Unit Injector Sleeve - Install
New Monitor Software Is Now Available for Certain Cat® Products {7490, 7494, 7601, 7603, 7610, 7620} New Monitor Software Is Now Available for Certain Cat® Products {7490, 7494, 7601, 7603, 7610, 7620}
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
Chassis Electronic Control Module (ECM) May Malfunction By Displaying Active Codes On Certain Off-Highway Trucks {7490, 7494, 7600, 7601, 7610, 7620, 7632} Chassis Electronic Control Module (ECM) May Malfunction By Displaying Active Codes On Certain Off-Highway Trucks {7490, 7494, 7600, 7601, 7610, 7620, 7632}
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
S3015, S3025 and S3035 Demolition and Scrap Shears Cutting Edge
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.