New VIMSpc Software Is Now Available for Certain Cat® Products {7620} Caterpillar


New VIMSpc Software Is Now Available for Certain Cat® Products {7620}

Usage:

793B 1HL
Articulated Truck
725C (S/N: LFB1-UP; TFB1-UP)
730C (S/N: LFF1-UP; TFF1-UP)
730C EJECTOR (S/N: LFH1-UP; TFH1-UP)
735B (S/N: L4D1-UP; T4P1-UP)
735C (S/N: LFJ1-UP; TFJ1-UP)
740B (S/N: L4E1-UP; T4R1-UP)
740B EJECTOR (S/N: L4F1-UP; T4S1-UP)
740C EJECTOR (S/N: LFN1-UP; TFN1-UP)
745C (S/N: LFK1-UP; TFK1-UP)
Excavator
5130 (S/N: 7TJ1-UP; 5ZL1-UP)
5130B (S/N: 4CS1-UP)
5230 (S/N: 7LL1-UP)
5230B (S/N: 4HZ1-UP)
Landfill Compactor
826K (S/N: 2321-UP; SET1-UP)
836K (S/N: T6X1-UP; L6Z1-UP; LWZ1-UP; TWZ1-UP)
Load Haul Dump
R1600G (S/N: 9PP1-UP; 9YZ1-UP)
R1600H (S/N: 9SD1-UP)
R1700G (S/N: SBR1-UP; 8XZ1-UP)
R2900G (S/N: GLK1-UP; JLK1-UP)
R3000H (S/N: RCM1-UP)
Motor Grader
14H (S/N: ASE1-UP)
14M (S/N: B9J1-UP; R9J1-UP)
16H (S/N: ATS1-UP)
16M (S/N: B9H1-UP; R9H1-UP)
16M Series 3 (S/N: E9Y1-UP; N9Y1-UP)
24H (S/N: 7KK1-UP)
24M (S/N: B931-UP; B9K1-UP)
Off-Highway Truck/Tractor
770G (S/N: RMA1-UP; TWA1-UP; RMD1-UP; KDH1-UP; ECM1-UP; ECX1-UP)
772G (S/N: TWB1-UP; RME1-UP; RMH1-UP; LTS1-UP; KEX1-UP; LTX1-UP)
773F (S/N: EED1-UP; EXD1-UP)
776D (S/N: AFS1-UP)
777D (S/N: AGC1-UP; FKR1-UP)
777F (S/N: JRP1-UP; JXP1-UP)
777G (S/N: GT71-UP; T5A1-UP; TNM1-UP; RDR1-UP; T4Y1-UP)
784B (S/N: 5RK1-UP)
784C (S/N: 2PZ1-UP)
785B (S/N: 6HK1-UP)
785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
785D (S/N: DMC1-UP; MSY1-UP)
789B (S/N: 7EK1-UP)
789C (S/N: 2BW1-UP)
789D (S/N: SPD1-UP; SHH1-UP)
793B (S/N: 1HL1-UP)
793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
793D (S/N: FDB1-UP)
793F (S/N: SND1-UP; SSP1-UP; SXP1-UP; RBT1-UP)
793F AC (S/N: EMD1-UP)
794 AC (S/N: MN51-UP)
795F AC (S/N: ERM1-UP)
795FAC XQ (S/N: SNT1-UP)
797 (S/N: 5YW1-UP)
797B (S/N: JSM1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)
MT4400D AC (S/N: MH41-UP)
Quarry Truck
773G (S/N: MWH1-UP; JWS1-UP; T5S1-UP; T5T1-UP)
775F (S/N: EYG1-UP; DLS1-UP)
775G (S/N: T5F1-UP; RFM1-UP; MJS1-UP; T5W1-UP)
Soil Compactor
825K (S/N: 2331-UP; SEE1-UP)
Track-Type Tractor
D10R (S/N: AKT1-UP)
D10T (S/N: RJG1-UP)
D11R (S/N: AAF1-UP; 7PZ1-UP)
D11T (S/N: AMA1-UP; GEB1-UP; TPB1-UP; MDG1-UP; JEL1-UP; JNS1-UP)
D8T (S/N: J8B1-UP; MLN1-UP; FCT1-UP; KPZ1-UP)
D9T (S/N: TWG1-UP; RJS1-UP; REX1-UP)
Underground Articulated Truck
AD30 (S/N: CXR1-UP; DXR1-UP)
AD45B (S/N: CXM1-UP)
AD55 (S/N: DNW1-UP)
AD55B (S/N: JNW1-UP)
AD60 (S/N: KNW1-UP)
Wheel Dozer
824K (S/N: 2341-UP; RWB1-UP)
834K (S/N: TW41-UP; L4Y1-UP; LWY1-UP; TWY1-UP)
844K (S/N: MBE1-UP; KLS1-UP)
854G (S/N: AMP1-UP; A4W1-UP; 1JW1-UP)
854K (S/N: 2211-UP; H9K1-UP; H8M1-UP)
Wheel Loader
950K (S/N: R4A1-UP; J5M1-UP; FER1-UP)
950M (S/N: EMB1-UP; ENE1-UP; XCJ1-UP; FTR1-UP; LCR1-UP; J1S1-UP)
962K (S/N: T6A1-UP; FLL1-UP; X4T1-UP)
962M (S/N: EJB1-UP; JYD1-UP; LSE1-UP; RCL1-UP; J2S1-UP; F2T1-UP)
966K (S/N: PBG1-UP; TFS1-UP)
966K Series XE (S/N: NGX1-UP)
966M (S/N: DYC1-UP; R8D1-UP; KJP1-UP)
966M Series XE (S/N: P6C1-UP; B8P1-UP)
972K (S/N: PEM1-UP; Z4W1-UP)
972M (S/N: L8E1-UP; A8P1-UP; JPR1-UP)
972M Series XE (S/N: M5S1-UP; EDW1-UP)
980G Series II (S/N: AXG1-UP)
980H (S/N: MHG1-UP)
980K (S/N: W7K1-UP; GTZ1-UP)
980M (S/N: MK21-UP; MGD1-UP; KRS1-UP; N8T1-UP)
982M (S/N: MK61-UP; F9A1-UP; LRS1-UP; K1Y1-UP)
988K (S/N: T8E1-UP; L8X1-UP; LWX1-UP; TWX1-UP)
990K (S/N: DJK1-UP; A9P1-UP)
992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
992K (S/N: 8801-UP; H4C1-UP; ZMX1-UP)
993K (S/N: LWA1-UP; Z4D1-UP; Z8D1-UP; Z9K1-UP; Z4Z1-UP; Z8Z1-UP)
994 (S/N: 9YF1-UP)
994D (S/N: 3TZ1-UP)
994F (S/N: 4421-UP)
994H (S/N: DWC1-UP)
994K (S/N: MM91-UP; MRK1-UP)

New VIMSpc software version 2015A is now available for certain Cat® products. The new software includes the following versions in the release of 2015A:

  • VIMSpc software 2015A (5.4.0.0 Update).

  • Version 3.1.4 of the database.

  • Version 15.3.6 of the master data.

Enhancements and Modifications of VIMSpc Version 2015A

The enhancements and modifications of VIMSpc version 2015A are listed below:

  • Updated java certificate for Merge and Report utility.

  • Added support to report strut pressures as value parameters for datalogger.

  • Added support to parse empty cycle timer files.

  • Improvements in multiple datalogger selection during report generation.

  • Improvements in displaying report’s create time as Personal Computer (PC) Date-time.

Installation Requirements

PC Admin Rights are required to install VIMSpc and master database updates. Once installed, standard users can run VIMSpc.

Note: All air cards should be removed and Virtual Private Network (VPN) turned off prior to installation, and when running VIMSpc while connecting to VIMS 3G modules and Cat® Product Link Elite devices.

System Requirements

The following computer hardware, communication hardware, cables, and software are needed to run VIMSpc successfully:

  • IBM® PC compatible with pentium 1 GHz processor or greater

  • 2 GB Random Access Memory (RAM) and 500 MB of available hard drive space

  • Required Windows 7 or Windows 8 (32-bit and 64-bit) Operating System (OS)

  • RS232 port with 16550AF UART (or compatible) or USB 1.1 or 2.0 port with a Universal Serial Bus (USB) to serial port adapter ( 370-8059 Adapter Kit) for use with VIMS download cable ( 127-9797 Cable As) for VIMS ABL and 68K hardware

  • Ethernet port for use with the VIMS 3G download cable ( 425-6889 Cable As), or 14-pin service port connector with Ethernet (457-6114 Cable As) for VIMS 3G and Product Link Elite hardware

  • Adobe PDF reader support

  • Java 6, 7, or 8 (32-bit version)

Note: Contact your Cat Technical Communicator (TC) for VIMSpc support or for further assistance.

Caterpillar Information System:

R1700 Load Haul Dump Power Train, Steering, Braking, Hydraulic, and Machine Systems Relief Valve (Torque Converter Outlet)
785G Off-Highway Truck Machines Systems Pump Drive - Disassemble
Troubleshooting Engine ECM Failure on Telehandler TL Series C {1408, 1422, 1900, 1901, 4493, 79K4} Troubleshooting Engine ECM Failure on Telehandler TL Series C {1408, 1422, 1900, 1901, 4493, 79K4}
Braking and Steering Overheating Events May Occur on Certain Command 793F Off-Highway Trucks {1365, 1380, 4250, 4300, 4346} Braking and Steering Overheating Events May Occur on Certain Command 793F Off-Highway Trucks {1365, 1380, 4250, 4300, 4346}
A New Water Pump is Now Used on Certain C9.3 Machine Engines {1361} A New Water Pump is Now Used on Certain C9.3 Machine Engines {1361}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553} Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
797F and 797F XQ Off-Highway Trucks Visual Service Procedure (VSP) Maintenance Intervals Isolation Mounts - Inspect/Replace - Primary ECM
Regulatory Compliance Information Radio Detection and Ranging (Radar) - C5 Radar - If Equipped
797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160} 797 Transmission Planet Shaft Plug Removal, Clean Planet Shaft Lube Passages and Install New Plug Procedures {0599, 0700, 0722, 3160}
24 Motor Graders Engine Supplement Muffler - Remove and Install
C175-16 and C175-20 Engines for Caterpillar Built Machines Centrifugal Oil Filter - Assemble
24 Motor Grader Power Train Torque Converter - Assemble
Certain Cat® Product Link (PL) Devices May Display Duplicate Assets in Fault Code Panel {7606} Certain Cat® Product Link (PL) Devices May Display Duplicate Assets in Fault Code Panel {7606}
Certain Cat® Product Link (PL) Devices Subscribed Under Cat Daily Subscription May Report Excessively {7606} Certain Cat® Product Link (PL) Devices Subscribed Under Cat Daily Subscription May Report Excessively {7606}
Product Link (PL) Web Configuration Manager May Not Save More Than Once in a Session for Certain Cat® Product Link Assets {7606} Product Link (PL) Web Configuration Manager May Not Save More Than Once in a Session for Certain Cat® Product Link Assets {7606}
Single Configuration File May Not be Updated in Product Link (PL) Web or Dealer Service Portal (DSP) on Certain Cat® Product Link Assets {7606} Single Configuration File May Not be Updated in Product Link (PL) Web or Dealer Service Portal (DSP) on Certain Cat® Product Link Assets {7606}
559D and 579D Knuckleboom Loader Machine Systems Piston Motor (Swing Drive) - Remove and Install
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Support (Cab) - Remove and Install
559D, 579D Knuckleboom Loader System Pressure Release
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Cab - Remove and Install
PM820, PM822, and PM825 Cold Planer Ventilation Inlet Ducts - Inspect/Clean
PM310, PM312, and PM313 Cold Planer Camera - Clean/Adjust
Front Wheel, Bearing and Duo-Cone Seal - Install Procedure is Updated for 794 AC Off-Highway Trucks {0374, 4006, 4251, 7561} Front Wheel, Bearing and Duo-Cone Seal - Install Procedure is Updated for 794 AC Off-Highway Trucks {0374, 4006, 4251, 7561}
CB13, CB15, and CB16 Asphalt Compactors Machine Systems Eccentric Weight (Versa Vib) - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.