Hydraulic Cylinder (Rear Door) - Remove and Install
- Remove bolt (1) and reposition tube (2).
Show/hide table
Illustration 2 g06232515 - Disconnect hose assembly (3) from moldboard door cylinder (4).
Show/hide table
Illustration 3 g06232539 - Remove cotter pin (5).
Repeat for the opposite end of the moldboard hydraulic cylinder (6).
Show/hide table
Illustration 4 g06232542 - Support the moldboard door hydraulic cylinder (7) and remove pin (8).
Repeat for opposite end of the moldboard hydraulic cylinder (7.)
Remove moldboard hydraulic cylinder (7).
Show/hide table
| |
| Illustration 1 | g06232517 |
- Install moldboard door hydraulic cylinder (7) in the reverse order of removal.
Caterpillar Information System:
A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555} A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555}
327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215} 327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215}
336, 336 GC and 340 Excavator Systems Swing Motor
794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped
794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
320GC, 320 and 323 Excavators Machine Systems Swivel - Remove and Install
A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901} A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901}
A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379} A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379}
C32 Tier 4 Final Marine Commercial Engines DEF Pump Motor - Test
New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380} New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380}
New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333} New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333}
A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480} A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480}
320GC Excavator Engine Supplement Hood - Remove and Install
320GC and 320 Excavator Engine Supplement Soot Antenna - Remove and Install
320GC and 320 Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
336, 336 GC and 340 Excavator Systems Main Control Valve
336, 336 GC and 340 Excavator Systems Stick System
G3500H 50Hz Generator Sets Sound Information
336, 336 GC and 340 Excavator Systems Bucket System
320GC and 320 Excavator Engine Supplement Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
320GC and 320 Excavator Engine Supplement Temperature Sensor (DPF) - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Window Wiper Motor - Remove and Install
XQ125 Generator Set Safety Messages
XQ125 Generator Set Model View Illustrations