794 AC Off-Highway Truck Caterpillar


Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped

Usage:

794 AC HRT

  • Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".


    Illustration 1g06240330

  • Remove cover (1) behind the platform of the powered stairway.


    Illustration 2g06240332

  • Remove oil level check plug (2).

  • Maintain the oil level at the bottom of the opening for the oil level check plug.

  • If necessary, remove filler cap (3) and add oil.
  • Caterpillar Information System:

    794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
    320GC, 320 and 323 Excavators Machine Systems Swivel - Remove and Install
    A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901} A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901}
    A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379} A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379}
    C32 Tier 4 Final Marine Commercial Engines DEF Pump Motor - Test
    New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380} New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380}
    New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333} New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333}
    A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480} A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480}
    794 AC Off-Highway Truck Magnetic Plug (Wheels) - Check
    C32 Marine Engines Electronic Control Module - Remove and Install
    336, 336 GC and 340 Excavator Systems Pilot System
    C7.1 Engines Coolant Pressure Is Low
    336, 336 GC and 340 Excavator Systems Swing Motor
    327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215} 327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215}
    A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555} A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555}
    PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Door) - Remove and Install
    320GC Excavator Engine Supplement Hood - Remove and Install
    320GC and 320 Excavator Engine Supplement Soot Antenna - Remove and Install
    320GC and 320 Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
    336, 336 GC and 340 Excavator Systems Main Control Valve
    336, 336 GC and 340 Excavator Systems Stick System
    G3500H 50Hz Generator Sets Sound Information
    336, 336 GC and 340 Excavator Systems Bucket System
    320GC and 320 Excavator Engine Supplement Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
    Back to top
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.