320GC, 320 and 323 Excavators Machine Systems Caterpillar


Swivel - Remove and Install

Usage:

320 GC BR4

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
422-5473  吊耳组件 
8C-8422  密封胶 
LOCTITE 243 

参考: 专门说明书, "目视维修步骤 - 颜色和符号" M0066576。

  1. 排放液压油。 请参考操作和保养手册液压系统油 – 更换 M0068104。


图 1g06241067


图 2g06241074


图 3g06241091


图 4g06241152


图 5g06241160


图 6g06241175


图 7g06241190


图 8g06241191


图 9g06241188


图 10g06241195


图 11g06241383


图 12g06241390


图 13g06241417


图 14g06241481

安装步骤

  1. 按与拆卸相反的顺序安装回转接头。


图 15g06246469


图 16g06246449

Caterpillar Information System:

A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901} A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901}
A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379} A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379}
C32 Tier 4 Final Marine Commercial Engines DEF Pump Motor - Test
New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380} New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380}
New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333} New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333}
A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480} A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480}
794 AC Off-Highway Truck Magnetic Plug (Wheels) - Check
C32 Marine Engines Electronic Control Module - Remove and Install
336, 336 GC and 340 Excavator Systems Pilot System
C7.1 Engines Coolant Pressure Is Low
C7.1 Marine Engine Exhaust Elbow - Remove and Install
The Buffer Seal Groove May Wear on the Steering Cylinder Head on Certain 773G and 777G Off-Highway Trucks {4303} The Buffer Seal Groove May Wear on the Steering Cylinder Head on Certain 773G and 777G Off-Highway Trucks {4303}
794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped
336, 336 GC and 340 Excavator Systems Swing Motor
327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215} 327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215}
A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555} A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Door) - Remove and Install
320GC Excavator Engine Supplement Hood - Remove and Install
320GC and 320 Excavator Engine Supplement Soot Antenna - Remove and Install
320GC and 320 Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
336, 336 GC and 340 Excavator Systems Main Control Valve
336, 336 GC and 340 Excavator Systems Stick System
G3500H 50Hz Generator Sets Sound Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.