A New Plate-Type Heat Exchanger is Now Available for Certain Cat® 3516C Marine Engines {1379}
- Engine
- 3516C (S/N: PXJ1-UP; TTJ1-UP)
A new plate-type heat exchanger is now available for certain Cat® 3516C Marine Engines.
The new plate-type heat exchanger is adaptable to the products within the listed serial numbers.
The new part number is given in Table 1.
Show/hide table
Qty | Part | Description |
1 | Sea Water Heat Exchanger Gp |
Refer to A&I Newsletter, LEDM0142, "3516C-HD Engine Mounted Plate Heat Exchanger" at the following location:
https://engines.cat.com/en/marine/application-installation.htmlCaterpillar Information System:
C32 Tier 4 Final Marine Commercial Engines DEF Pump Motor - Test
New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380} New Jacket Water Bypass Tube is Now Used on Certain C175-20 Locomotive Engines {1380}
New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333} New Improved Gearbox Oil Heater is Now Used on Certain G3512E, G3516H, G3520C, and G3520H Generator Sets {1333}
A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480} A New Service Replacement Control Board (APC1+) is Now Used on Certain Cat® Uninterrupted Power Supply {1418, 4480}
794 AC Off-Highway Truck Magnetic Plug (Wheels) - Check
C32 Marine Engines Electronic Control Module - Remove and Install
336, 336 GC and 340 Excavator Systems Pilot System
C7.1 Engines Coolant Pressure Is Low
C7.1 Marine Engine Exhaust Elbow - Remove and Install
The Buffer Seal Groove May Wear on the Steering Cylinder Head on Certain 773G and 777G Off-Highway Trucks {4303} The Buffer Seal Groove May Wear on the Steering Cylinder Head on Certain 773G and 777G Off-Highway Trucks {4303}
336, 336 GC and 340 Excavator Systems Stick Cylinder
320GC and 320 Excavator Engine Supplement Nitrogen Oxide Sensor - Remove and Install
A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901} A New Heat Shrink is Now Used for Certain Cat Electronic Control Module (ECM) Resistors {0644, 1901}
320GC, 320 and 323 Excavators Machine Systems Swivel - Remove and Install
794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil - Change - If Equipped
794 AC Off-Highway Truck Electric Drive Pump (Powered Stairway) Oil Level - Check - If Equipped
336, 336 GC and 340 Excavator Systems Swing Motor
327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215} 327-8644 Gauge Replacement {0374, 0701, 0763, 1214, 1215}
A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555} A New Integral Seal is Now Available for Certain 3524B Engines {1151, 1157, 1162, 1166, 1206, 3279, 7555}
PM820, PM822, and PM825 Cold Planer Machine Systems Hydraulic Cylinder (Rear Door) - Remove and Install
320GC Excavator Engine Supplement Hood - Remove and Install
320GC and 320 Excavator Engine Supplement Soot Antenna - Remove and Install
320GC and 320 Excavator Engine Supplement Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
336, 336 GC and 340 Excavator Systems Main Control Valve