C9.3B Engines Caterpillar


Engine Speed - Check

Usage:

D6 B72

Table 1
Tools Needed 
Part Number  Part Name  Quantity 
348-5430  Multi-Tool Gp 

Note: Caterpillar Electronic Technician (ET) can also be used.

You can observe the engine rpm, which is displayed on the status screen of Cat ET.



Illustration 1g02167834
348-5430 Multi-Tool Gp

The 348-5430 Multi-Tool Gp can measure engine rpm from a magnetic pickup. This magnetic pickup is located in the flywheel housing. Refer to Tool Operating Manual, NEHS1087 for the testing procedure.

The 348-5430 Multi-Tool Gp is also a photo-tachometer that is held by hand for general use. The multi-tool can measure the engine speed by placing a piece of reflective tape on the crankshaft pulley. Refer to Tool Operating Manual, NEHS1087 for the testing procedure.

Note: The measurement of engine rpm can be set with the Cat ET. Refer to the Troubleshooting manual.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.