New VIMSpc Software Is Now Available On Certain Cat® Products {7620} Caterpillar


New VIMSpc Software Is Now Available On Certain Cat® Products {7620}

Usage:

793B 1HL
Articulated Truck
735B (S/N: L4D1-UP; T4P1-UP)
740B (S/N: L4E1-UP; T4R1-UP)
740B EJECTOR (S/N: L4F1-UP; T4S1-UP)
Excavator
5130 (S/N: 7TJ1-UP; 5ZL1-UP)
5130B (S/N: 4CS1-UP)
5230 (S/N: 7LL1-UP)
5230B (S/N: 4HZ1-UP)
Load Haul Dump
R1600G (S/N: 9PP1-UP; 9YZ1-UP)
R1700G (S/N: SBR1-UP; 8XZ351-UP)
R2900G (S/N: GLK1-UP; JLK1-UP)
Motor Grader
14M (S/N: B9J1-UP; R9J1-UP)
16M (S/N: B9H1-UP; R9H1-UP)
24H (S/N: 7KK1-UP)
24M (S/N: B931-UP; B9K1-UP)
Off-Highway Truck/Tractor
770G (S/N: TWA1-UP; RMD1-UP; ECM1-UP)
772G (S/N: TWB1-UP; RMH1-UP; LTS1-UP)
773F (S/N: EED1-UP; EXD1-UP)
776D (S/N: AFS1-UP)
777D (S/N: AGC1-UP)
777F (S/N: JRP1-UP)
777G (S/N: TNM1-UP)
784B (S/N: 5RK1-UP)
784C (S/N: 2PZ1-UP)
785B (S/N: 6HK1-UP)
785C (S/N: 1HW1-UP; APX1-UP; 5AZ1-UP)
785D (S/N: MSY1-UP)
789B (S/N: 7EK1-UP)
789C (S/N: 2BW1-UP)
789D (S/N: SPD1-UP; SHH1-UP)
793B (S/N: 1HL1-UP)
793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
793D (S/N: FDB1-UP)
793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
795F AC (S/N: ERM1-UP)
797 (S/N: 5YW1-UP)
797B (S/N: JSM1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)
Quarry Truck
773G (S/N: MWH1-UP)
775F (S/N: DLS1-UP)
775G (S/N: RFM1-UP; MJS1-UP)
Track-Type Tractor
D10R (S/N: AKT1-UP)
D10T (S/N: RJG1-UP)
D11R (S/N: AAF1-UP; 7PZ1-UP)
D11T (S/N: AMA1-UP; TPB1-UP; MDG1-UP; JEL1-UP; JNS1-UP)
D8T (S/N: J8B1-UP; MLN1-UP; FCT1-UP; KPZ1-UP)
D9T (S/N: TWG1-UP; RJS1-UP; REX1-UP)
Underground Articulated Truck
AD30 (S/N: CXR1-UP; DXR1-UP)
AD45B (S/N: CXM1-UP)
AD55B (S/N: JNW1-UP)
AD60 (S/N: KNW1-UP)
Wheel Dozer
854G (S/N: AMP1-UP; A4W1-UP; 1JW1-UP)
854K (S/N: 2211-UP; H9K1-UP; H8M1-UP)
Wheel Loader
950K (S/N: R4A1-UP; J5M1-UP; FER1-UP)
962K (S/N: T6A1-UP; X4T1-UP)
966K (S/N: PBG1-UP; A5S1-UP; TFS1-UP)
966K Series XE (S/N: NGX1-UP)
972K (S/N: PEM1-UP; Z4W1-UP)
980K (S/N: W7K1-UP; GTZ1-UP)
992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
992K (S/N: 8801-UP; H4C1-UP)
993K (S/N: LWA1-UP; Z4D1-UP; Z9K1-UP; Z4Z1-UP)
994 (S/N: 9YF1-UP)
994D (S/N: 3TZ1-UP)
994F (S/N: 4421-UP)
994H (S/N: DWC1-UP)

New VIMSpc software version 2015A is now available on certain Cat® products. The new software includes the following versions in the release of 2015A:

  • VIMSpc software 2015A (5.3.0.1 Update).

  • Version 3.1.4 of the database.

  • Version 15.2.9 of the master data.

Enhancements and Modifications of VIMSpc Version 2015A

The enhancements and modifications of VIMSpc version 2015A are listed below:

  • Enhancements to machine connectivity.

  • Introduced auto-detect functionality for Ethernet connection.

  • Enhanced data logger reporting to view data from multiple files.

  • Added support to connect and reset 185-6778 Monitor Electronic Control Module (Truck Payload Measurement System ((TPMS)).

  • Added support to display data from 5130 shovel.

  • Enhanced snapshot report to identify trigger event.

  • Added support for payload files for 992G.

  • Support for user-defined state and value parameters for reports from PLElitesystems.

  • Enhancement to database deletion process.

  • Improvements in reporting download screen information.

Installation Requirements

PC Admin Rights are required to install VIMSpc and master database updates. Once installed, standard users can run VIMSpc.

Note: All air cards should be removed and Virtual Private Network (VPN) turned off prior to installation, and when running VIMSpc while connecting to VIMS 3G modules.

System Requirements

The following computer hardware, communication hardware, cables, and software are needed to run VIMSpc successfully:

  • IBM® PC compatible with pentium 1 GHz processor or greater.

  • 2 GB RAM.

  • Required Windows 7 or Windows 8 (32-bit and 64-bit) Operating System (OS)

  • RS232 port with 16550AF UART (or compatible) or USB 1.1 or 2.0 port with a Universal Serial Bus (USB) to serial port adapter ( 370-8059 Adapter Kit) for use with VIMS download cable ( 127-9797 Cable As) for VIMS ABL and 68K hardware.

  • Ethernet port for use with the VIMS 3G download cable ( 425-6889 Cable As) for VIMS 3G hardware.

  • Adobe PDF reader.

  • Java 6, 7, or 8 (32-bit version).

Note: Contact your Cat Technical Communicator (TC) for VIMSpc support or for further support.

Caterpillar Information System:

PM310, PM312 and PM313 Cold Planer Propel Systems Travel Speed - Test
How to Check SCV Current in Cat Electronic Technician (ET) on Certain C3.3B Tier IV Final and C3.8 Tier IV Interim Engines {1920} How to Check SCV Current in Cat Electronic Technician (ET) on Certain C3.3B Tier IV Final and C3.8 Tier IV Interim Engines {1920}
A Procedure to Repair the Front Suspension Casting on Certain 793 Off-Highway Trucks is Available {7050, 7051, 7200} A Procedure to Repair the Front Suspension Casting on Certain 793 Off-Highway Trucks is Available {7050, 7051, 7200}
Procedure to Repair the Front Suspension Casting on Certain 793 Off-Highway Trucks {7051, 7200} Procedure to Repair the Front Suspension Casting on Certain 793 Off-Highway Trucks {7051, 7200}
PM820, PM822, and PM825 Cold Planer Engine Supplement Engine Enclosure (Hood) - Remove and Install
Procedure for Installing a Foot Pedal for Operating a Hydraulic Hammer on Certain 420F2, 430F2, 432F2, and 444F2 Backhoe Loaders {1435} Procedure for Installing a Foot Pedal for Operating a Hydraulic Hammer on Certain 420F2, 430F2, 432F2, and 444F2 Backhoe Loaders {1435}
548 Forest Machine Machine System Front Lines
PM310, PM312 and PM313 Cold Planer Propel Systems Pressure Limiter Valve (Propel Pump) - Test and Adjust
548 Forest Machine Machine System Front Lines
986K Wheel Loader Systems Oil Filter (Hydraulic) - Pilot Lines
548 Forest Machine Machine System Stick
548 Forest Machine Machine System Stick
Certain Cat® Product Link (PL542) Cable Assembly Packages May Contain Incorrect Cable {7606} Certain Cat® Product Link (PL542) Cable Assembly Packages May Contain Incorrect Cable {7606}
Improved Product Link Off-Board Software is Now Available for All Cat® Products {7606, 7620} Improved Product Link Off-Board Software is Now Available for All Cat® Products {7606, 7620}
PM310, PM312 and PM313 Cold Planer Propel Systems Case Drain Flow for Piston Motor (Propel) - Test
Procedure To Install Articulating Hitch Group for Certain 24M Motor Graders {7057, 7100} Procedure To Install Articulating Hitch Group for Certain 24M Motor Graders {7057, 7100}
Cleaner Fingers in Cleaner Bar Group May Wear On Certain 826K and 836K Landfill Compactors {7160} Cleaner Fingers in Cleaner Bar Group May Wear On Certain 826K and 836K Landfill Compactors {7160}
PM820, PM822, and PM825 Cold Planer Maintenance Interval Schedule
Washer Pump Assembly for the Window Washer Tank Group May Fail on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {7306} Washer Pump Assembly for the Window Washer Tank Group May Fail on Certain Material Handlers, Mobile Hydraulic Power Units, and Wheeled Excavators {7306}
CB13, CB15, CB16 Vibratory Asphalt Compactors Safety Messages
730C2 Articulated Truck Suspension and Suspension Cylinder Bearings - Lubricate
PM310, PM312 and PM313 Cold Planer Propel Systems Propel Current - Calibrate
Regulatory Compliance Information Machine Security System - MSS3i and MSS S1 - If Equipped
548 Forest Machine Machine System Bucket Cylinder
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.