New Water Temperature Regulators Available {1355} Caterpillar


New Water Temperature Regulators Available {1355}

Usage:

3616 1FN
Engine
3500 and G3500 Engines
All C280 and 3600 Commercial Engines
Engine News, SEBD9218, 1, December 1994, New Water And Oil Temperature Regulators Available. Disregard the previous article, refer to the article that follows.

Description Of Change: New water and oil temperature regulators are used in 3500 and 3600 Families Of Commercial Engines. The new temperature regulators include the following improvements:

  • More accurate opening and closing temperatures

  • Lower leakage rates

  • Structural improvements

Adaptable To: The new and former regulators are listed in Table 1.

Table 1
Temperature Regulator 
New Part Number  Temperature  Former Part Number 
418-4163  Opening 81 - 84° C (178 - 183° F)
Fully Open 92° C (198° F) 
7E-7933, 6I-4950, 248-5513 
6I-4955  Opening 67 - 69° C (153 - 156° F)
Fully Open 81° C (178° F) 
7E-1237, 6I-4951 
6I-4952  Opening 45 - 47° C (113 - 117° F)
Fully Open 50° C (122° F) 
7C-0311 
6I-4953  Opening 26 - 28° C (79 - 82° F)
Fully Open 37° C (99° F) 
4W-0018 
4W-4011  Opening 75 - 78° C (167 - 172° F)
Fully Open 89° C (192° F) 
7E-6210, 7E-9269, 6I-4954, 120-9453 
6I-4955  Opening 67 - 69° C (153 - 156° F)
Fully Open 81° C (178° F) 
4P-0301 
418-4165  Opening 84 - 86° C (183 - 187° F)
Fully Open 95° C (203° F) 
6I-4957, 198-3427 
418-4162  Opening 87 - 89° C (187 - 192° F)
Fully Open 98° C (208° F) 
6I-4956, 122-3821, 247-7133 

Caterpillar Information System:

C0.5 and C0.7 Industrial Engines Refill Capacities
120 and 120 AWD Motor Grader Maintenance Interval Schedule
C0.5 and C0.7 Industrial Engines Stopping the Engine
C0.5 and C0.7 Industrial Engines Starting the Engine
3512E Engines Fuel Control Valve - Remove and Install - Primary
Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713} Certain Cat® Reman Fuel Injectors May be Marked with Incorrect Trim Codes {1251, 1254, 1290, 1713}
New Engine Software is Now Available for 3512C Engines Used On Certain Mining Shovels {7620} New Engine Software is Now Available for 3512C Engines Used On Certain Mining Shovels {7620}
C0.5 and C0.7 Industrial Engines Diagnostic Flash Code Retrieval
C0.5 and C0.7 Industrial Engines Overspeed
C0.5 and C0.7 Industrial Engines Gauges and Indicators
C0.5 and C0.7 Industrial Engines Emissions Certification Film
320GC and 320 Excavator Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
C9.3B Engines for Caterpillar Built Machines Camshaft - Remove
G3500H Generator Set Engine Fuel Differential Pressure Is Low
320 GC, 320 and 323 Excavator Machine Systems Joystick and Pedal - Calibrate
320GC, 320 and 323 Excavators Machine Systems Boom Bearings and Seals - Remove and Install
C0.5 and C0.7 Industrial Engines Monitoring System
C0.5 and C0.7 Industrial Engines Cold Weather Operation
3500 Industrial and Generator Set Engines Refill Capacities
C32 Marine Auxiliary Engine Catalyst (SCR) - Replace
New Starters Are Now Used for Certain C9.3 Engines {1453} New Starters Are Now Used for Certain C9.3 Engines {1453}
Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571} Instructions for Collecting Fluid Sample from Viscous Damper on Certain Cat® Engines {0645, 1000, 5569, 7542, 7571}
3512E HD Petroleum Engine Engine Oil - Change
3512E Land Electric Drive Engine Oil Filter - Change
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.