3500E Marine Engines Caterpillar

Inlet Manifold

Usage:

3516E MD5

Show/hide table




Illustration 1	g06195103

Show/hide table




Illustration 2	g06195108
Bolt (1) tightening sequence for aftercooler assembly on both sides

Show/hide table




Illustration 3	g06195110
Bolt (2) tightening sequence for manifold assembly

Show/hide table

Table 1
Specification for 442-6325 Inlet Manifold Gp
Item	Qty	Part	Specification Description
1	20	0T-0065 Bolt	Use the following procedure to tighten the bolts: 1. Tighten the bolts at the locations called 1 to 47 ± 9 N·m (35 ± 7 lb ft) as shown in Illustration 2. 2. Tighten the bolts at the locations called 2 to 47 ± 9 N·m (35 ± 7 lb ft) as shown in Illustration 2. 3. Tighten the bolts at the locations called 3 to 47 ± 9 N·m (35 ± 7 lb ft) as shown in Illustration 2.
2	14	261-5615 Bolt	Use the following procedure to tighten the bolts: 1. Tighten the bolts at the locations called 1 to 50 ± 10 N·m (37 ± 7 lb ft) as shown in Illustration 3. 2. Tighten the bolts at the locations called 2 to 50 ± 10 N·m (37 ± 7 lb ft) as shown in Illustration 3. 3. Tighten the bolts at the locations called 3 to 50 ± 10 N·m (37 ± 7 lb ft) as shown in Illustration 3. 4. Tighten the bolts at the locations called 4 to 50 ± 10 N·m (37 ± 7 lb ft) as shown in Illustration 3.
3	16	6V-5101 O-Ring Seal	Lubricate the bore lightly with the 5P-3975 Rubber Lubricant.

Caterpillar Information System:

3500E Marine Engines Inlet Manifold

A New Reducer Hose Is Used on Certain 3512C Commercial Engines {1051} A New Reducer Hose Is Used on Certain 3512C Commercial Engines {1051}

C11 and C13 Industrial Engines Piston and Rings

C11 and C13 Industrial Engines Cylinder Head

C9.3B Engines for Caterpillar Built Machines Housing (Front) - Remove

323F LN MHPU Capacities (Refill)

320 GC, 320 and 323 Excavator Machine Systems Travel Motor

320 GC, 320 and 323 Excavator Machine Systems Oil Makeup (Travel System)

C11 and C13 Engines Cylinder Head Valves

C175-16 Locomotive Engines Crankshaft Vibration Damper seals - Replace

C13, C15, and C18 Tier 4 Final Engines SCR Inducement Emergency Override

Different Housings are Used on 3400 Remanufactured Engines {1304} Different Housings are Used on 3400 Remanufactured Engines {1304}

G3516 Petroleum Engines Fuel Control Valve - Remove and Install - Low Pressure

3500E Marine Engines Cylinder Head

C9.3B Engines for Caterpillar Built Machines Housing (Front) - Install

320 GC, 320 and 323 Excavator Machine Systems Swing System

3500E Marine Engines Cylinder Block

320GC, 320 and 323 Excavators Machine Systems Swing Drive - Disassemble

320GC, 320 and 323 Excavators Machine Systems Swing Drive - Assemble

3516E Generator Set Engines Pressure Sensor (DEF)

3500E Marine Engines Exhaust Manifold

3500E Marine Engines Nitrogen Oxide Sensor (Engine Exhaust Out)

3500E Marine Engines Nitrogen Oxide Sensor (Exhaust Pipe Out)

3500E Marine Engines Exhaust Manifold