A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production {1306, 1306} Caterpillar


A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production {1306, 1306}

Usage:

3126 1ZJ
Engine
3116 (S/N: 2MR1-UP)
3126 (S/N: 1ZJ1-UP; CKK1-UP; 6MK1-UP)
3126B (S/N: BEJ1-UP; DCS1-UP)
C-9 (S/N: CLJ1-UP)
Marine Engine
3126B MARINE (S/N: 9ZF1-UP)
C9 MARINE (S/N: CSN1-UP)
SEBD9329, 01, January 2004, A New Spring for the Oil Filter Bypass Valve and for the Oil Cooler Bypass Valve is Now in Production. Disregard this previous article. The specifications listed in the previous article are incorrect.

The former 9L-9188 Spring has been replaced with the new 242-3864 Spring. Refer to Table 1 for the serial number breaks.

Table 1
Engine Model  Engine Serial Number 
3116  S/N:2MR03588 
3126  S/N:1ZJ04021 
3126  S/N:CKK00252 
3126  S/N:6MK01853 
3126B  S/N:9ZF00782 
3126B  S/N:DCS00647 
3126B  S/N:BEJ04634 
C-9  S/N:CLJ004643 
C-9  S/N:CSN00452 

The engine has two of the 242-3864 Springs. One spring is for the oil filter bypass valve and the other spring is for the oil cooler bypass valve.

Note: Engines that are equipped with a remote oil filter base require three 242-3864 Springs.

The former 9L-9188 Spring has not been cancelled. The 9L-9188 Spring is still available for parts service in other applications of this spring.



Illustration 1g01044967
(1) 242-3864 Springs

Caterpillar Information System:

C175 Tier 4 Final Engines for Off-Highway Trucks Cylinder Block, Liners and Heads
C9.3B Engines for Caterpillar Built Machines Water Pump - Disassemble
320 GC, 320 and 323 Excavator Towing the Machine
3512B HD SR500 Generator Sets Generator - Inspect
The 370-3964 Inner Coupling May Fail on Certain G3520C Generator Sets {3252} The 370-3964 Inner Coupling May Fail on Certain G3520C Generator Sets {3252}
3512B HD SR500 Generator Sets Air Inlet Filter - Inspect/Clean/Test
New Seals Are Now Used for Certain C175 and 3500 Engines with Oil Mist Detection Systems {1336, 1336} New Seals Are Now Used for Certain C175 and 3500 Engines with Oil Mist Detection Systems {1336, 1336}
3512B HD SR500 Generator Sets General Maintenance Information
3512B SR4B Generator Sets Voltage Regulators
3512B SR4B Generator Sets Generator Operation
320 GC, 320 and 323 Excavator Frozen Ground Conditions
A New Metering Pump Group is Now Used on Certain Off-Highway Trucks {4312} A New Metering Pump Group is Now Used on Certain Off-Highway Trucks {4312}
C9.3B Industrial Engine Safety Messages
Installation Master Guide for the 533-1782 Auxiliary Control Ar (Tool Control) on Certain Next Generation Hydraulic Excavators {5051} Installation Master Guide for the 533-1782 Auxiliary Control Ar (Tool Control) on Certain Next Generation Hydraulic Excavators {5051}
Installation of the 489-2976 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 489-2976 Front Lines Gp on Certain Hydraulic Excavators {5057}
Installation of the 490-2713 Chassis Wiring Gp on Certain Hydraulic Excavators {1408} Installation of the 490-2713 Chassis Wiring Gp on Certain Hydraulic Excavators {1408}
Installation of the 490-2714 Valve Wiring Gp on Certain Hydraulic Excavators {1408} Installation of the 490-2714 Valve Wiring Gp on Certain Hydraulic Excavators {1408}
Installation of the 532-0153 Valve Gp on Certain Hydraulic Excavators {5051} Installation of the 532-0153 Valve Gp on Certain Hydraulic Excavators {5051}
Installation of the 492-2066 Front Lines Gp on Certain Hydraulic Excavators {5057} Installation of the 492-2066 Front Lines Gp on Certain Hydraulic Excavators {5057}
Installation of the 491-6992 Oil Cooler Lines Gp on Certain Hydraulic Excavators {1374} Installation of the 491-6992 Oil Cooler Lines Gp on Certain Hydraulic Excavators {1374}
C9.3B Industrial Engine Starting with Jump Start Cables - Do Not Use This Procedure in Hazardous Locations that have Explosive Atmospheres
CX38-P892 Well Servicing Transmission Modulating Valve (Electronic Clutch Pressure Control)
120 and 120 AWD Motor Grader Operation
120 and 120 AWD Motor Grader Specifications
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.