Modulating Valve (Torque Converter Lockup Clutch)
Show/hide table
| |
| Illustration 1 | g06185519 |
|
(1) Solenoid
(2) Tank return port (3) Clutch supply port (4) Supply oil port | |
In the activated position the solenoid (1) receives a signal from the ECM. The solenoid pushes the spool to the right and compresses the spring. Supply oil from the pump flows into the valve through supply oil port (4). The oil flows through the spool to clutch supply port (3). The oil from clutch supply port (3) flows to the clutch.
Caterpillar Information System:
3512B HD SR500 Generator Sets Model View Illustrations
120 and 120 AWD Motor Grader Fuses - Replace
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Cylinder Lines
Fuel Injection Pump on Certain C4.4 and C7.1 Generator Sets {1251, 1290} Fuel Injection Pump on Certain C4.4 and C7.1 Generator Sets {1251, 1290}
G3516 TA Engine Speed Control - Test
120 and 120 AWD Motor Grader Display and Camera - Clean - If Equipped
320 GC, 320 and 323 Excavator Bucket - Remove and Install
120 and 120 AWD Motor Grader Mirror - If Equipped
C175 Tier 4 Final Engines for Off-Highway Trucks Diesel Exhaust Fluid Quality - Test
323F SA Excavator and 323F MHPU Machine Systems Specifications
Improved Engine and Generator Base Assemblies Are Now Used on Certain G3512E and G3516H Generator Sets {7060} Improved Engine and Generator Base Assemblies Are Now Used on Certain G3512E and G3516H Generator Sets {7060}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620} New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Assemble
3512B HD SR500 Generator Sets Plate Locations and Film Locations
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
3512B SR4B Generator Sets Product Lifting
320 GC, 320 and 323 Excavator Bucket Linkage - Inspect/Adjust
A New Metering Pump Group is Now Used on Certain Off-Highway Trucks {4312} A New Metering Pump Group is Now Used on Certain Off-Highway Trucks {4312}
320 GC, 320 and 323 Excavator Frozen Ground Conditions
3512B SR4B Generator Sets Generator Operation
3512B SR4B Generator Sets Voltage Regulators
3512B HD SR500 Generator Sets General Maintenance Information
New Seals Are Now Used for Certain C175 and 3500 Engines with Oil Mist Detection Systems {1336, 1336} New Seals Are Now Used for Certain C175 and 3500 Engines with Oil Mist Detection Systems {1336, 1336}
3512B HD SR500 Generator Sets Air Inlet Filter - Inspect/Clean/Test