Fuel Injection Pump on Certain C4.4 and C7.1 Generator Sets {1251, 1290} Caterpillar


Fuel Injection Pump on Certain C4.4 and C7.1 Generator Sets {1251, 1290}

Usage:

C4.4DE88E0 EC9
Electric Power Generation
C4.4 DE110E2 (S/N: GTH1-UP)
C4.4 DE88E0 (S/N: EC91-UP; GT91-UP)
C7.1 DE200E0/DE (S/N: GTP1-UP; ECW1-UP)
DE150E0 (S/N: GTW1-UP; GTY1-UP)

Introduction

The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.

Problem

There have been some instances of issues with the following fuel injection pumps:

Table 1
Part Number  Description 
295-0435  Fuel Injection Pump Gp 
348-6930  Pump 
415-4313  Pump 
420-4524  Fuel Injection Pump 
422-5257  Fuel Injection Pump 
443-3226  Fuel Injection Pump 

The issue may be reported as low engine power or the high idle speed may be inconsistent. Most issues have been reported below 200–300 hours of service.

Solution

Note: Do not attempt to adjust the fuel pump or repair the fuel pump.

Install a replacement fuel pump of the same part number. Refer to Disassembly and Assembly, Fuel Injection Pump - Remove and Disassembly and Assembly, Fuel Injection Pump - Install for the correct procedure.

Retain the removed fuel pump for 30 days. The fuel pump will be requested for return using the Send It Back (SIB) process.

Caterpillar Information System:

G3516 TA Engine Speed Control - Test
120 and 120 AWD Motor Grader Display and Camera - Clean - If Equipped
320 GC, 320 and 323 Excavator Bucket - Remove and Install
120 and 120 AWD Motor Grader Mirror - If Equipped
C175 Tier 4 Final Engines for Off-Highway Trucks Diesel Exhaust Fluid Quality - Test
323F SA Excavator and 323F MHPU Machine Systems Specifications
Improved Engine and Generator Base Assemblies Are Now Used on Certain G3512E and G3516H Generator Sets {7060} Improved Engine and Generator Base Assemblies Are Now Used on Certain G3512E and G3516H Generator Sets {7060}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620} New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
C175 Tier 4 Final Engines for Off-Highway Trucks Aftertreatment SCR System Dosing - Test
C175 Tier 4 Final Engines for Off-Highway Trucks ECM - Replace
C175 Tier 4 Final Engines for Off-Highway Trucks Speed/Timing - Test
320 GC, 320 and 323 Excavator Machine Systems Main Control Valve
323F SA and 323F LN Excavator and 323F LN MHPU Machine Systems Specifications Boom Cylinder Lines
120 and 120 AWD Motor Grader Fuses - Replace
3512B HD SR500 Generator Sets Model View Illustrations
CX38-P892 Well Servicing Transmission Modulating Valve (Torque Converter Lockup Clutch)
320GC, 320 and 323 Excavators Machine Systems Main Control Valve - Assemble
3512B HD SR500 Generator Sets Plate Locations and Film Locations
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451} Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
3512B SR4B Generator Sets Product Lifting
320 GC, 320 and 323 Excavator Bucket Linkage - Inspect/Adjust
A New Metering Pump Group is Now Used on Certain Off-Highway Trucks {4312} A New Metering Pump Group is Now Used on Certain Off-Highway Trucks {4312}
320 GC, 320 and 323 Excavator Frozen Ground Conditions
3512B SR4B Generator Sets Generator Operation
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.