Electronic Control (Diesel Exhaust Fluid) - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts free from contaminants. Contaminants may cause rapid wear and shortened component life. |
Note: Repeat the procedure for each electronic control.
- Remove 12 bolts (1) and remove panel (2).
Show/hide table
Illustration 2 g06180475 - Remove two locks (6) and disconnect harness (7).
- Remove two nuts (3) and two bolts (4) to remove electronic control (5).
Show/hide table
| |
| Illustration 1 | g06180387 |
- Install electronic control (5) in the reverse order of removal.
- Tighten bolts (4) and nuts (3) to a torque of
15 ± 3 N·m (132 ± 27 lb in) .
- Tighten bolts (4) and nuts (3) to a torque of
Caterpillar Information System:
773E Off-Highway Truck Machine Systems Electronic Control Module (Payload) - Remove and Install
773E Off-Highway Truck Machine Systems Electronic Control Module (Traction Control System) - Remove and Install
426F2 Backhoe Loader Power Train Transmission (Direct Drive) - Install
New Software Version Is Now Available for Cat® Terrain for Drilling {7605, 7610, 7620} New Software Version Is Now Available for Cat® Terrain for Drilling {7605, 7610, 7620}
773E Off-Highway Truck Power Train Transmission Planetary and Transfer Gears - Install
773E Off-Highway Truck Power Train Transmission Planetary and Transfer Gears - Remove
279D3, 289D3, 299D3, 299D3 XE Compact Track Loaders and 246D3, 262D3, 272D3, 272D3 XE Skid Steer Loaders Power Train Track - Remove and Install - Steel Track
299D2 and 299D2 XHP Compact Track Loaders, 297D2 and 297D2 XHP Multi Terrain Loaders and 272D2 and 272D2 XHP Skid Steer Loaders Power Train Idler - Remove and Install - Single Flange
740 Ejector Articulated Truck Engine Compression Brake Valve Lash - Check
740 Ejector Articulated Truck Capacities (Refill)
740 Ejector Articulated Truck Additional Messages
740 Ejector Articulated Truck Tire Shipping Pressure
C13, C15, and C18 Generator Set Engines CID 1922 FMI 05 Intake Valve Actuation System Oil Pressure Solenoid Current Below Normal
C13, C15, and C18 Generator Set Engines CID 1922 FMI 06 Intake Valve Actuation System Oil Pressure Solenoid Current Above Normal
797F Off-Highway Truck Field Assembly Cooling System Package - Install - High Altitude
784C and 785C Off-Highway Truck/Tractors Suspension Head (Front) - Inspect
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Power Train Drive Sprocket
426F2 Back Hoe Loader Machine System Cab - Install
793F Off-Highway Truck Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
C9.3B Engines Coolant Temperature Sensor
426F2 Backhoe Loader Power Train Steering Cylinder (Front) - Remove and Install - 2WD
426F2 Backhoe Loader Power Train Final Drive Planetary - Remove and Install - Rear
426F2 Backhoe Loader Power Train Solenoid Valve (Transmission) - Remove and Install
CB7 and CB8 Vibratory Asphalt Compactor Propel System (Solid Drum) General Information (Propel System) - Solid Drum