New Engine Oil Cooler Groups Are Used on Certain 3500 Marine Engines {1378}
- Engine
- 3508 (S/N: 96Y1-UP)
- 3508B (S/N: S2E1-UP)
- 3508C (S/N: TTA1-UP; PXB1-UP; TTB1-UP)
- 3512 (S/N: 50Y1-UP)
- 3512B (S/N: S2H1-UP; S2J1-UP; S2L1-UP; 8EM1-UP)
- 3516 (S/N: 29Z1-UP)
- 3516B (S/N: S2S1-UP; S2Z1-UP)
- 3508B (S/N: S2E1-UP)
Description Of Change: The new engine oil cooler groups have a high copper/nickel content to eliminate engine oil coking.
Adaptable To: The new engine oil cooler groups replace the former cooler groups and are adaptable back to first production on the serial numbers listed above. Refer to Table 1 for a list of the new and former oil cooler groups.
Show/hide table
New Group Part Number | New Core Part Number | Former Group Part Number | Former Core Part Number |
---|---|---|---|
Show/hide table
Effective Serial Numbers |
S/N:96Y02175-UP |
S/N:S2E00855-UP |
S/N:PXB00002-UP |
S/N:TTA00278-UP |
S/N:TTB00604-UP |
S/N:50Y01913-UP |
S/N:8EM00562-UP |
S/N:S2H00710-UP |
S/N:S2J00799-UP |
S/N:S2L00993-UP |
S/N:29Z01699-UP |
S/N:S2S00495-UP |
S/N:S2Z00441-UP |
Caterpillar Information System:
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Exhaust Has Excessive Black Smoke
C32 Marine Auxiliary Engine Reference Information
3512C Engines for 785C Off-Highway Trucks with Dynamic Gas Blending Acceleration Is Poor or Throttle Response Is Poor
C32 Marine Auxiliary Engine Engine Starting
C9.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valves - Remove and Install
3516B Generator Set Engines with Dynamic Gas Blending Speed/Timing - Test
New Water-Cooled Throttles Are Now Used on Certain G3500 Engines {1265} New Water-Cooled Throttles Are Now Used on Certain G3500 Engines {1265}
Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304} Identifying Oil Pumps on Certain 3400, C27, and C32 Machine Engines {1304}
3512B Generator Set Engines with Dynamic Gas Blending Engine Monitoring System
3516B Generator Set Engines with Dynamic Gas Blending Timing - Calibrate
C7.1 Marine Propulsion Engine Marine Towing
C9.3B Engines for Caterpillar Built Machines Fuel Manifold - Remove and Install
C32 Marine Auxiliary Engine Before Starting Engine
C9.3B Engines for Caterpillar Built Machines Inlet and Exhaust Valve Guides - Remove and Install
G3516 TA Engine Configuration Parameters
NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408} NRS Temperature Sensor on Certain C3.4B Engines {1000, 1408}
G3516 Petroleum Engine Valve Stem Projection - Measure/Record
G3516 TA Engine Electronic Control System Parameters - Configuration Parameters
The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C} The NOx Reduction System Cooler May Fail on Certain C27 and C32 Engines {108C}
C175 Tier 4 Final Engines for Caterpillar Built Machines Valve Lifter - Remove
Water Pump on Certain C2.2 Engines {1361, 7555} Water Pump on Certain C2.2 Engines {1361, 7555}
A Slave Relay Should be Used for Customer Connections to EMCP 4 On Certain Generator Sets {1422, 4493} A Slave Relay Should be Used for Customer Connections to EMCP 4 On Certain Generator Sets {1422, 4493}
Starting Motor Servicing on Certain C7.1 Engines {1453} Starting Motor Servicing on Certain C7.1 Engines {1453}
CX38-P892 Well Servicing Transmission General Information